Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is extended. The mounting pins can be secured with circlips. In addition, M4 threads are cut into the pins so that a reinforcement plate can be fitted.
The aforementioned plate, clutch linings, complete clutches and the clutch hub without threaded holes can be found in the accessories section.
Original Puch spare part number: 349.1.12.504.2
Details
| Material | Steel |
| Surface | sandblasted |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Ø inside | 11.85 mm |
| Ø outside | 92.6 mm |
| Thickness | 19.1 mm |
| Area of application | Standard |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 28 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm
EUR 21.20
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Area of application: High End · Area of application: MX · Area of application: Racing · Material: Steel · Area of application: Tuning · Surface: galvanized (blue) · Material addition: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 92.5 mm · Thickness: 19 mm
EUR 224.80
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 21.2 mm
EUR 497.10
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Material: Steel · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material addition: Chrome steel (known as Nirosta®) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 22 mm · Ø outside: 94 mm
EUR 142.00
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.70
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Ø inside: 12 mm · Bearing cage: Silver cage · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Width: 16.2 mm · Bearing type: Needle roller and cage assembly · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
EUR 16.50
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Material: Sealing paper · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Ø inside: 106 mm · Thickness: 0.5 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Color: sand-colored · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.40
Collection only possible with online purchase and appointment.
