Stainless steel reinforcement plate for E50 input engines of Puch Maxi mopeds/mopeds.
The chrome steel plate can be used for 2- and 3-jaw clutches.
Bending of the clutch cams is no longer possible after mounting this 1.5 mm thick plate.
The M5 countersunk screws included with the clutch reinforcement plate have a strength of 10.9.
Ø inside: 40 mm
Ø outside: 90.5 mm
Thickness: 1.5 mm
Strength: 10.9
Material: Chrome steel A2, stainless (Nirosta)
Attention: For some clutches, the bolts may have to be shortened down to the circlip so that the clutch with installed plate does not touch the clutch basket.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Material | Chrome steel (known as Nirosta®) |
| Area of application | Road use |
| Ø inside | 40 mm |
| Ø outside | 90.5 mm |
| Height | 1.5 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Spring steel · Surface: coated · Color: blue · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Total length: 28 mm · Number of components: 3 pcs
EUR 21.20
Axial needle roller bearing 6.4/17/2 clutch original | Puch E50
Ø inside: 6.4 mm · Bearing cage: Sheet steel cage · Ø outside: 17 mm · Manufacturer: Puch · Area of application: Original · Area of application: Standard · Width: 2 mm · Bearing type: Needle roller and cage assembly · Dimension needle bearing: 6.4/17 x 2 · Puch OEM number: 900.6840
EUR 35.40
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 26.6 mm · Ø wire: 2 mm · Manufacturer: swiing · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: red · Number of components: 3 pcs · Ø inside: 4.3 mm · Ø outside: 8.45 mm
EUR 21.20
swiing clutch springs reinforced (+60%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 26.9 mm · Ø wire: 2.05 mm · Manufacturer: swiing · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: yellow · Number of components: 3 pcs · Ø inside: 4.3 mm · Ø outside: 8.45 mm
EUR 21.20
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: hardened & ground · Ø outside: 22 mm · Ø outside: 24 mm · Ø inside: 15 mm · Ø inside: 17 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
EUR 46.10
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Spring steel · Surface: coated · Color: blue · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Total length: 28 mm · Number of components: 3 pcs
EUR 21.20
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 26.6 mm · Ø wire: 2 mm · Manufacturer: swiing · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: red · Number of components: 3 pcs · Ø inside: 4.3 mm · Ø outside: 8.45 mm
EUR 21.20
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.60
Not in stock
Collection only possible with online purchase and appointment.
