Strengthened clutch springs to fit the clutch of your Puch moped / moped with E50 engine.
These tuning springs are 20 % harder than the original springs, making them ideal for use in moderately tuned engines.
With tuned engines, the clutch often engages too early when the engine is not yet up to speed. With the tuning springs, the centrifugal clutch engages later and the extra power is optimally transferred to the rear wheel.
The scope of delivery includes 3 pieces.
| Spring design | Pressure spring |
| Ø wire | 1.7 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Spring steel |
| Surface | coated |
| Color | blue |
| Total length | 28 mm |
| Ø inside | 4.8 mm |
| Ø outside | 8.3 mm |
| Number of components | 3 pcs |
| Area of application | Tuning |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Thickness: 0.35 mm · Puch OEM number: 349.1.10.349.1
EUR 2.75
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Color: red · Total length: 26.6 mm · Area of application: Tuning
EUR 20.60
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Number of components: 3 pcs · Manufacturer: swiing® ingenious parts · Color: yellow · Material: Spring steel · Area of application: Tuning · Surface: coated · Ø outside: 8.45 mm · Ø inside: 4.3 mm · Total length: 26.9 mm
EUR 20.60
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Number of jaws: 3 pcs · Recording type: Cone mounting · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
EUR 59.20
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Thickness: 0.5 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.45
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.50
Hot 
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Thread type: MF10x1 (fine pitch thread) · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Thread length: 15 mm · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Weight: 968 g · Number of gears: 1 pcs
EUR 213.50
Collection only possible with online purchase and appointment.
