High-quality revision kit for the Bing SRF and 17 mm Bing SRE tuning carburetor with Ø23 mm connection dimension to the intake manifold. The revision kit is suitable for Puch Maxi, Puch X30 Sport NS/NL and Puch X30 Sport NG-2AH, Sachs 503 and other mopeds & mopeds which are originally equipped with a 17 mm SRF or have been retrofitted with a 17 mm SRF tuning carburetor.
The following parts are included in the revision set:
- Float
- Float chamber sealing ring (sealing paper)
- Float needle
- Float axle
- Stand throttle screw & spring
- Start slide & choke pin (SRF)
- Float needle 39.5 mm (1 groove)
- Needle clip & spacer
- Gas slide (Ø 18.5 mm) & spring
- Carburetor cover gasket (SRF)
- Clamping screw M6 x 20 mm
- Senstock 2.20 (SRF) & gasket no. 74
- Swivel connection with screw and sealing rings
Attention: This revision set is only suitable for the Bing SRF & swiing SRF tuning carburetor with 17 mm (Ø 23 mm connection), which has the äusliche optics of the SRE and the slide tower of the SRF carburetor.
Nostalgic product for the highest demands of the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Component group Carburetor | Sealing, revising |
| Material | Steel, Plastic, Brass, Sealing carton, Sealing paper, Aluminum, Spring steel |
| Surface | raw, blank |
| Color | silver, black, brown |
| Carburetor type | SRF |
| Ø Passage | 17 mm |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Ratings
Accessories & related products
17 mm Bing SRF carburetor (replica)
Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRF · Nominal diameter: 17 mm · Nozzle thread: M4x0.7 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 78 mm · Mounting type: Plug connection clamped · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Width: 64 mm · Height: 117 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 74.80
swiing® revival nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
EUR 18.30
17 mm carburetor set (Bing SRF replica) | Zündapp Belmondo
Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRF · Nominal diameter: 16 mm · Nominal diameter: 17 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17 mm · Hole spacing inlet: 40 mm · Ø Air filter connection: 60 mm · Choke control: Hand choke
EUR 126.70
Bing "19 mm" SRF carburetor
Nominal diameter: 17 mm · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Ø fuel hose connection: 6 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 23 mm · Ø Output inside: 19 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 60.2 mm · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Area of application: Tuning
EUR 97.90
Hot 
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Width: 47 mm · Carburetor type: SRE · Height: 89 mm · Height: 109 mm · Nominal diameter: 17 mm · Total length: 65 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.2 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 138.20
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 17 mm · Ø fuel hose connection: 5 mm · Width: 47 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Total length: 64.8 mm · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 110 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m
EUR 138.20
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nominal diameter: 17 mm · Width: 47 mm · Ø fuel hose connection: 5 mm · Area of application: Tuning · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Total length: 61.5 mm · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 112 mm · Ø Air filter connection: 23 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 138.20
Moped fans also bought
- 12 %
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue)
EUR 2.75
EUR 2.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.40
GPO air filter | Puch Supermaxi LG1, LG2 Cat
Manufacturer: GPO · Camouflaged: Yes · Material: Plastic · Color: black · Filter type: Foam · Filter type: Racing screen · Filter type: Standard sieve · Ø Internal connection: 28 mm · Mounting type: Plug connection clamped · Area of application: Standard · Area of application: Tuning
EUR 28.70
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Total length: 38 mm · Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Material: Aluminum · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø External connection: 23 mm · Hole spacing inlet: 38 mm · Total height: 53.5 mm · Height flange center hole: 42 mm
EUR 51.80
Collection only possible with online purchase and appointment.
