A supposed 19 mm Bing SRF replica carburetor.
The passage is slightly conical, so that the diameter is 19 mm on the outside, but only slightly larger than 17 mm in the middle.
The carburetor is not of the same quality as original Bing products, but is a good and inexpensive alternative.
Sink block is for nozzles with M4 thread.
ØAir filter screen: 60.2 mm
Connection diameter to intake manifold: 23 mm
Mounted nozzle size: unknown
| Nominal diameter | 17 mm |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SRF |
| Ø fuel hose connection | 6 mm |
| Mounting type | Plug connection clamped |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 60.2 mm |
| Ø Internal connection | 23 mm |
| Choke control | Hand choke |
| Area of application | Tuning |
| Nozzle thread | M4x0.7 (standard thread) |
| Puch |
| Zündapp Belmondo |
| Kreidler |
Ratings
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 50 mm
EUR 32.60
Inox
Hot 
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Total length: 360 mm · Thread type: M8x1.25 (standard thread) · Thread size: M8 · Clamping diameter: 22 mm · Test mark: none
EUR 33.10
swiing® revival nozzle set M4 (70 - 90) Bing 18, Bing 85
Manufacturer: swiing® revival parts · Quantity: 11 pcs · Component group Carburetor: Spraying · Material: Brass · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle thread: M4x0.7 (standard thread)
EUR 26.00
66HEROES Air filter mushroom grille black Dell'Orto SHA (Ø=60 mm)
Manufacturer: 66HEROES · Mounting type: Bride · Mounting type: Plug connection clamped · Material: Metal · Camouflaged: No · Material: Rubber · Area of application: Tuning · Color: black · Filter type: Grille · Total length: 46 mm · Length rubber part: 18 mm · Ø Internal connection: 60 mm · Length of filter section: 28 mm · Ø outside: 87 mm
EUR 23.60
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Mounting type: Stud bolt · Number of fixing points: 2 pcs · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Total length: 65 mm · Ø inside: 17.8 mm · Hole spacing inlet: 32 mm · Height flange center hole: 45 mm · Total height: 55 mm · Ø External connection: 20 mm
EUR 88.90
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 45 mm · Ø External connection: 23 mm · Ø inside: 17 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Total height: 73 mm · Height flange center hole: 61 mm · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 59.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
