Original reproduction air filter for your Puch Supermaxi LG1, LG2 moped / moped with catalytic converter.
The air filter box is supplied in disassembled condition.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
Carburetor connection diameter with Büchse: 20 mm (can also be mounted on a normal Puch Maxi S or N, but the flange must be shortened)
Carburetor connection diameter without Büchse: 28 mm
Select the desired air filter screen in the selection field:
- Standard: original air filter screen
- Racing: Screen with fewer filter layers for more air flow
- Tuning: two-layer filter mat for maximum air flow
Note: From the factory, a joint with silicone sealant was drawn around the seam of the original air filter after the two parts were joined to eliminate the risk of air leakage. We recommend doing the same with this air filter.
You will find a suitable sealant and other useful parts in the accessories section.Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Camouflaged: Yes · Color: black · Material: Plastic · Filter type: Box · Ø Internal connection: 20 mm, 28 mm · Mounting type: Plug connection clamped · Area of application: Tuning
Details
| Manufacturer | GPO |
| Material | Plastic |
| Color | black |
| Area of application | Standard, Tuning |
| Filter type | Standard sieve, Racing screen, Foam |
| Ø Internal connection | 28 mm |
| Mounting type | Plug connection clamped |
| Camouflaged | Yes |
Suitable for the following models
| Puch |
Accessories & related products
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 18.80
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm
EUR 23.60
EUR 337.14/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Number of components: 1 pcs · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.30
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Width: 47 mm · Height: 89 mm · Height: 109 mm · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Total length: 65 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.00
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Material: Aluminum · Camouflaged: Yes · Ø External connection: 23 mm · Ø inside: 17 mm · Height flange center hole: 42 mm · Total height: 53.5 mm · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 38 mm
EUR 53.20
Collection only possible with online purchase and appointment.
