swiing® ingenious parts

Mofa parts thought through, perfected.

Rethinking moped parts: swiing® Ingenious Parts stands for innovation, precision, and performance. High-quality high-end and shadow tuning parts take original parts to the next level - for an optimized riding experience and maximum quality.

Seat	Frauenfeld, Switzerland
Status	Active
Foundation	2014

Maximum performance
High-end tuning parts for outstanding performance and driving dynamics.
Shadow tuning
Discreet tuning parts, difficult to identify and inconspicuous.
Precision & quality
Developed with Swiss engineering.
Easy assembly
Well-thought-out solutions for quick and easy installation.

Innovation meets Swiss precision

swiing® Ingenious Parts combines innovation with Swiss perfection. Our goal: to rethink original parts and take them to the next level. With high-end and shadow tuning parts, we offer cutting-edge technological solutions for riders who value quality, performance and durability.

More than just spare parts

Our parts are more than just replacements – they are an evolution. Developed using the latest technology and the highest standards of functionality, swiing® Ingenious Parts enable an optimized driving experience. Because your moped deserves more.

shop-life-brands-swiing_ip-03-L-ingenious

The best products from swiing® Ingenious Parts More swiing® Ingenious Parts

For: Puch

15779

swiing® ingenious piston 45 mm | Puch

Manufacturer: swiing® ingenious parts · Nominal diameter: 45 mm · Ø outside piston (A): 44.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 4.6 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.9 mm · Weight piston kit: 91 g

EUR 53.30

For: Puch

15778

swiing® ingenious piston 44 mm | Puch

Manufacturer: swiing® ingenious parts · Nominal diameter: 44 mm · Ø outside piston (A): 43.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.6 mm · Total piston height (E): 52.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Weight piston kit: 91 g

EUR 53.30

swiing® ingenious spare rope Ø 4 mm rope pull starter

For: Puch · Piaggio

15534

swiing® ingenious spare rope Ø 4 mm rope pull starter

Manufacturer: swiing® ingenious parts · Color: black · Ø outside: 4 mm · Total length: 1100 mm

EUR 5.80

Inox

Universal

16842

swiing® ingenious extension pedal axle + 48 mm Inox

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Total length: 78 mm · Ø outside: 32 mm · Ø Pedal arm holder: 15.8 mm · Ø bore: 16.1 mm · Depth: 35 mm

EUR 65.20

swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer

For: Piaggio

16882

swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer

Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Total length: 100 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 3 pcs

EUR 21.20

swiing® ingenious exhaust flange Ø 28 mm (no gasket) | Puch

For: Puch

16461

swiing® ingenious exhaust flange Ø 28 mm (no gasket) | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: raw · Ø inside: 28 mm · Ø outside: 39 mm · Ø outside: 62 mm · Place of use: Outlet · Ø mounting hole: 6.5 mm · Hole spacing: 42 mm · Thickness: 5 mm

EUR 14.10

swiing® ingenious puller L17 / BO15 / E15 shoulder bearing

For: Puch · Sachs

10942

swiing® ingenious puller L17 / BO15 / E15 shoulder bearing

Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Total length: 120 mm · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs

EUR 52.10

swiing® ingenious 15 mm intake manifold (CNC) | Puch X30 Velux

For: Puch

15290

swiing® ingenious 15 mm intake manifold (CNC) | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Area of application: Tuning

EUR 52.10

swiing® ingenious lever for decompressor | Sachs 503 (A1782)

For: Sachs

15083

swiing® ingenious lever for decompressor | Sachs 503 (A1782)

Manufacturer: swiing® ingenious parts · Color: silver · Alternative version of the Pony OEM number: A1782 · Alternative version of the Sachs OEM number: 0248 149 000

EUR 23.60

Hot

swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N

For: Puch

10004

swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 59 mm · Total length: 910 mm · Color: Chrome · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange

EUR 177.90

Hot

swiing® ingenious tool Ignition adjustment analog M14x1.25

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos · Cilo

10000

swiing® ingenious tool Ignition adjustment analog M14x1.25

Manufacturer: swiing® ingenious parts · Thread type: MF14x1.25 (fine pitch thread) · Area of application: Measuring tool · Material: Steel · Number of components: 4 pcs · Puch OEM number: 905.6.32.101.0

EUR 86.50

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50

For: Puch

10389

swiing® ingenious torsion spring clutch lever reinforced +20% | Z50

Spring design: Torsion spring · Manufacturer: swiing® ingenious parts

EUR 10.60

Inox

For: Puch

11326

swiing® ingenious spring gearshift (reinforced, +20%) Inox | Puch X30 Z50

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel)

EUR 17.70

- 33 %

Inox

For: Puch

11325

swiing® ingenious spring gearshift Inox | Puch Velux

Spring design: Nose feather · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Area of application: Standard · Alternative version of the Puch OEM number: 320.5.14.018.1

EUR 17.70

EUR 11.80

Inox

For: Puch

11352

swiing® ingenious intake manifold Gilardoni italkit Inox

Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Ø inside: 21 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole pattern [mm]: 60 x 35 · Number of fixing points: 4 pcs · Total height: 55 mm · Height flange center hole: 42.5 mm · Total length: 80 mm · Area of application: Tuning

EUR 80.60

swiing® ingenious reduction sleeve air filter 15 mm carburetor (23/20 mm) | Puch X30 Velux

For: Universal · Puch

18457

swiing® ingenious reduction sleeve air filter 15 mm carburetor (23/20 mm) | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Color: white · Material: Polyamide (PA) · Ø inside: 20 mm · Ø outside: 23 mm · Total length: 15 mm

EUR 9.40

New

swiing® ingenious chain whip / sprocket blocker "H415" 1/2 "x3/16"

Universal

19265

swiing® ingenious chain whip / sprocket blocker "H415" 1/2 "x3/16"

Holding area: 124 mm · Manufacturer: swiing® ingenious parts · Area of application: (Dis)assembly tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Total length: 380 mm

EUR 41.40

swiing® ingenious 16 mm intake manifold Bing SRE | Zündapp Belmondo (Type 247)

For: Zündapp Belmondo · Zündapp

19139

swiing® ingenious 16 mm intake manifold Bing SRE | Zündapp Belmondo (Type 247)

Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 40 mm · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 47.30

swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)

For: Zündapp Belmondo · Zündapp

19140

swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)

Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Ø inside: 16 mm · Ø External connection: 23 mm · Mounting type: Screws · Hole spacing inlet: 40 mm · Number of fixing points: 2 pcs · Total height: 42 mm · Height flange center hole: 35 mm · Total length: 35 mm · Area of application: Tuning

EUR 47.30

swiing® ingenious 16 mm intake manifold (Dell'Orto SHA) | Puch X30 NS, NL

For: Puch

19311

swiing® ingenious 16 mm intake manifold (Dell'Orto SHA) | Puch X30 NS, NL

Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Ø External connection: 19 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 82.50

swiing® ingenious 15 mm carburetor set (Bing SRE) | Zündapp Belmondo

For: Zündapp Belmondo · Zündapp

19133

swiing® ingenious 15 mm carburetor set (Bing SRE) | Zündapp Belmondo

Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Nominal diameter: 16 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 40 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 142.30

Hot

swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503

For: Sachs

19135

swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503

Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Carburetor type: SRE · Choke control: Hand choke · Mounting type: Flange · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 32 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 189.70

swiing® ingenious piston 40 mm | Cilo 502

For: Cilo

17840

swiing® ingenious piston 40 mm | Cilo 502

Manufacturer: swiing® ingenious parts · Nominal diameter: 40 mm · Ø outside piston (A): 39.93 mm · Ø piston pin (B): 12 mm · Compression height (C): 27.9 mm · Curvature (D): 5.1 mm · Total piston height (E): 54 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.65 mm · Weight piston kit: 93 g

EUR 82.90

swiing® ingenious inlet seal Ø 15 mm | Puch X30 Velux

For: Puch

18149

swiing® ingenious inlet seal Ø 15 mm | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Place of use: Admission · Thickness: 0.5 mm · Hole spacing inlet: 32 mm

EUR 3.45

swiing® ingenious piston ring 38x1.5 mm hard chrome-plated | Puch

For: Puch

20322

swiing® ingenious piston ring 38x1.5 mm hard chrome-plated | Puch

Manufacturer: swiing® ingenious parts · Surface: hard chrome plated · Diameter: 38 mm · Nominal diameter: 38 mm · Piston ring impact: Internal fuse (IS) · Height: 1.5 mm

EUR 10.60

swiing® ingenious piston ring 44x1.5 mm hard chrome-plated | Puch

For: Puch

20326

swiing® ingenious piston ring 44x1.5 mm hard chrome-plated | Puch

Manufacturer: swiing® ingenious parts · Surface: hard chrome plated · Diameter: 44 mm · Nominal diameter: 44 mm · Piston ring impact: Internal fuse (IS) · Height: 1.5 mm

EUR 10.60

swiing® ingenious 15 mm intake manifold & air filter | Sachs 50/2, 50/3, 50/4

For: Sachs

20304

swiing® ingenious 15 mm intake manifold & air filter | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black-matt · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 31 mm · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 94.80

swiing® ingenious 15 mm Bing SRE carburetor set | Sachs 50/2, 50/3, 50/4

For: Sachs

20303

swiing® ingenious 15 mm Bing SRE carburetor set | Sachs 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 52 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 31 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning

EUR 136.30

swiing® ingenious piston rings Ø 44 x 1.5 mm black (pair) | Puch

For: Puch

20357

swiing® ingenious piston rings Ø 44 x 1.5 mm black (pair) | Puch

Manufacturer: swiing® ingenious parts · Diameter: 44 mm · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Height: 1.5 mm

EUR 10.60

Hot

swiing® ingenious pull starter Bosch / Ducati | Puch E50

For: Puch

10721

swiing® ingenious pull starter Bosch / Ducati | Puch E50

Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Total length: 160 mm · Ø outside: 130 mm · Width: 150 mm · Height: 88 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm

EUR 177.90

swiing® ingenious clutch springs reinforced (+20%) | Puch E50

For: Puch

10078

swiing® ingenious clutch springs reinforced (+20%) | Puch E50

Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Color: blue · Total length: 28 mm · Area of application: Tuning

EUR 21.20

Set

swiing® ingenious tuning set 38 mm (with choice of exhaust) | Puch E50, ZA50

For: Puch

19615

swiing® ingenious tuning set 38 mm (with choice of exhaust) | Puch E50, ZA50

Nominal diameter: 38 mm · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Outlet type: straight · Camouflaged: Yes · Area of application: Tuning

EUR 355.80

swiing® ingenious engine mount | Zündapp Belmondo

For: Zündapp Belmondo

19581

swiing® ingenious engine mount | Zündapp Belmondo

Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: galvanized (blue)

EUR 71.10

swiing® ingenious exhaust manifold 28 mm black | Sachs 503

For: Sachs

19926

swiing® ingenious exhaust manifold 28 mm black | Sachs 503

Manufacturer: swiing® ingenious parts · Material: Steel · Ø outside: 28 mm · Color: black · Mounting type: Bride

EUR 41.40

swiing® ingenious motor mount | Sachs 504

For: Sachs

19584

swiing® ingenious motor mount | Sachs 504

Manufacturer: swiing® ingenious parts · Area of application: Motor bracket · Material: Steel · Surface: galvanized (blue)

EUR 71.10

- 14 %

swiing® ingenious mirror mount M10 aluminum black

Universal

19887

swiing® ingenious mirror mount M10 aluminum black

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Clamping diameter: 22 mm · Total length: 52 mm · Width: 18 mm · Height: 55 mm · Thread size: M10

EUR 41.40

EUR 35.50

swiing® ingenious gasket set for Airsal 43.5 mm motor | Beta 521 & 512

For: Pony / Cilo (Beta 521 & 512)

20164

swiing® ingenious gasket set for Airsal 43.5 mm motor | Beta 521 & 512

Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Ø cylinder: 43.5 mm · Hole spacing outlet: 42 mm · Area of application: Tuning

EUR 17.70

swiing® ingenious 16 mm carburetor set (Dell'Orto SHA) | Puch X30 NS, NL

For: Puch

20142

swiing® ingenious 16 mm carburetor set (Dell'Orto SHA) | Puch X30 NS, NL

Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Nominal diameter: 16 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Area of application: Tuning

EUR 154.10

Hot

swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch

For: Puch

17081

swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch

Thread type: MF12x1 (fine pitch thread) · Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Ø outside: 29.02 mm · Total length: 165 mm · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm · Shank length: 74.5 mm · Width across flats: 19 mm · Ball bearing closed: Yes

EUR 46.20

Hot

swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch

For: Puch

17984

swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch

Diameter: 29 mm · Thread type: MF12x1 (fine pitch thread) · Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Ø outside: 29 mm · Total length: 190 mm · Material: Steel · Surface: galvanized (blue) · Ø shaft: 19 mm · Thread length: 29 mm · Thread length: 53 mm · Shank length: 100 mm · Width across flats: 19 mm · Ball bearing closed: Yes

EUR 46.20

swiing® ingenious drive pinion cable starter Bosch / Ducati | Puch E50

For: Puch

11582

swiing® ingenious drive pinion cable starter Bosch / Ducati | Puch E50

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ignition system: BOSCH · Ignition system: DUCATI · Number of fixing points: 2 pcs

EUR 46.20

Hot

swiing® ingenious 15 mm intake manifold camouflaged | Puch E50

For: Puch

19141

swiing® ingenious 15 mm intake manifold camouflaged | Puch E50

Material: Aluminum · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Ø External connection: 20 mm · Mounting type: Screws · Area of application: Tuning · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1

EUR 41.40

swiing® ingenious exhaust manifold 28 mm chrome | Sachs 503

For: Sachs

19925

swiing® ingenious exhaust manifold 28 mm chrome | Sachs 503

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 26 mm · Ø outside: 28 mm · Mounting type: Bride · Color: Chrome · Total length: 410 mm · Flame tube attachment: inserted

EUR 41.40

swiing® ingenious bushing fork swing arm brass original | Piaggio Ciao

For: Piaggio

22290

swiing® ingenious bushing fork swing arm brass original | Piaggio Ciao

Manufacturer: swiing® ingenious parts · Material: Brass · Ø outside: 16 mm · Ø inside: 12.85 mm · Ø Bundle: 22 mm · Total length: 12 mm

EUR 8.20

swiing® ingenious exhaust nut M36x1.5 | Cilo 502T

For: Cilo

17510

swiing® ingenious exhaust nut M36x1.5 | Cilo 502T

Manufacturer: swiing® ingenious parts · Material: Brass · Surface: nickel-plated · Nut type: Union nut · Thread type: MF36x1.5 (fine pitch thread)

EUR 47.30

Hot

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Universal

18196

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Material: Aluminum · Manufacturer: swiing® ingenious parts · Thickness: 1 mm · Area of application: Measuring tool · Surface: anodized

EUR 29.50

swiing® ingenious oil level screw engine red | Zündapp Type 247

For: Zündapp Belmondo · Zündapp

17802

swiing® ingenious oil level screw engine red | Zündapp Type 247

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Thread type: M6x1 (standard thread) · Thread length: 12 mm

EUR 5.80

swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux

For: Puch

17836

swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25 mm · Ø outside: 28 mm · Total length: 380 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm

EUR 47.30

swiing® ingenious carburetor cover Bing SRF

For: Puch · Zündapp Belmondo · Kreidler

21996

swiing® ingenious carburetor cover Bing SRF

Manufacturer: swiing® ingenious parts · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Carburetor type: SRF · Total length: 37.7 mm · Width: 25 mm · Height: 11.9 mm · Hole spacing: 15 mm

EUR 16.50

swiing® ingenious disc brake system cast rim | Puch

For: Puch

22271

swiing® ingenious disc brake system cast rim | Puch

Manufacturer: swiing® ingenious parts · Color: red · Ø outside: 230 mm · Ø inside: 92 mm · Thickness: 3 mm

EUR 260.90

swiing® ingenious screw set disc brake cast wheel | Puch

For: Puch

22270

swiing® ingenious screw set disc brake cast wheel | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Screw head: Hexagon · Number of components: 5 pcs

EUR 15.30

swiing® ingenious wheel hub disc brake cast rim black | Puch

For: Puch

22269

swiing® ingenious wheel hub disc brake cast rim black | Puch

Manufacturer: swiing® ingenious parts · Color: black · Material: Aluminum · Surface: anodized

EUR 142.30

swiing® ingenious needle roller bearing 12/15/14.2 original silver cage

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Solex · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo · DKW · Fantic · Garelli · Honda · ILO / JLO · Kreidler · Malaguti · MBK / Motobécane · Miele · Monark · Peugeot · Victoria · Yamaha

22386

swiing® ingenious needle roller bearing 12/15/14.2 original silver cage

Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548

EUR 14.10

swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo

For: Piaggio

22446

swiing® ingenious 19 mm PHBG intake manifold Speed Engine | Piaggio Ciao, SI, Bravo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: graphite colors · Ø inside: 19 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole spacing inlet: 36 mm · Number of fixing points: 2 pcs · Area of application: Tuning

EUR 35.50

swiing® ingenious exhaust manifold 32 mm chrome | Sachs 503

For: Sachs

22477

swiing® ingenious exhaust manifold 32 mm chrome | Sachs 503

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 26.3 mm · Ø inside: 29.8 mm · Ø outside: 32.4 mm · Total length: 435 mm · Color: Chrome · Mounting type: Bride · Ø External connection: 29 mm

EUR 53.30

swiing® ingenious exhaust manifold 32 mm black | Sachs 503

For: Sachs

22478

swiing® ingenious exhaust manifold 32 mm black | Sachs 503

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Ø outside: 32 mm · Color: black · Mounting type: Bride · Ø External connection: 26 mm

EUR 53.30

swiing® ingenious freewheel remover wide version hardened

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio

22573

swiing® ingenious freewheel remover wide version hardened

Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: Hardened · Width across flats: 21 mm

EUR 30.70

swiing® ingenious clutch springs reinforced (+60%) | Puch E50

For: Puch

22588

swiing® ingenious clutch springs reinforced (+60%) | Puch E50

Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: yellow

EUR 21.20

swiing® ingenious clutch springs reinforced (+50%) | Puch E50

For: Puch

22587

swiing® ingenious clutch springs reinforced (+50%) | Puch E50

Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning

EUR 21.20

swiing® ingenious Clutch Reinforcement Set (+50%) | Zündapp Belmondo 247

For: Zündapp Belmondo · Zündapp

23210

swiing® ingenious Clutch Reinforcement Set (+50%) | Zündapp Belmondo 247

Manufacturer: swiing® ingenious parts · Number of springs: 10 pcs · Area of application: Tuning

EUR 65.20

Other mofakult brands

swiing® Revival Parts

swiing® Revival Parts brings the history of mopeds to life with original parts that are manufactured with Swiss precision and attention to detail. Each component is based on the original standards and manufactured using the latest technology to ensure the highest quality and durability. This is how tradition is preserved – for all those who appreciate the original and rely on proven craftsmanship.

GPO – GOOD PARTS ONLY.

We created GPO because we have experienced enough ourselves as mechanics, riders, and enthusiasts: Parts that don't fit. Quality that doesn't last. Prices that nobody understands anymore. GPO stands for honest spare parts: No gimmicks. No unnecessary bells and whistles. Only parts that fit. Period.

66HEROES

Mainly not original. Custom parts from 66HEROES add the finishing touches to your customised look. After all, it's the details that turn a beautiful motorbike into your personal gem.

mofakult Merch

No matter where you are, your love for the moped or the cult beats too strongly not to show it. Everyday fun for absolute fans.