Set
Hot 
World-class racing exhaust for your Puch Maxi S & N moped / moped with E50 engine and correspondingly large racing cylinder with exhaust outlet.
This is a thoroughbred racing muffler with an impressive resonance kick that delivers brute power directly to the rear wheel. The resonance pot dominates over the entire power band, pulls powerfully and showed noticeably more energy in endurance tests compared to comparable alternatives.
The racing wing is handmade from 0.8 mm thick material and leaves nothing to be desired in terms of performance, quality and accuracy of fit. The 3-point mounting of the muffler with additional reinforcement ensures stability and considerably reduces the risk of fatigue fracture. With a protective coating applied at the factory, the racing pot is ready for immediate installation.
| Material | Steel |
| Surface | varnished |
| Manufacturer | swiing® ingenious parts |
| Ø Silencer | 60 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit without head | Puch
Material: Aluminum · Surface: sandblasted · Nominal diameter: 47 mm · Manufacturer: Parmakit · Number of fixing points: 4 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 49.5 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 28 mm · Hole spacing outlet: 45 mm · Outlet type: slanted · Hole spacing inlet: 46 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 366.30
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Material: Steel · Thickness: 20.3 mm · Manufacturer: HK Clutches · Ø outside: 93 mm · Material addition: Aluminum · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: Racing · Number of springs: 3 pcs
EUR 366.30
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Material: Aluminum · Surface: sandblasted · Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Number of fixing points: 4 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Area of application: Tuning · Ø Inlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 248.10
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 295.40
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
EUR 295.40
Polini CP 23 mm carburetor (hand choke)
Material: Aluminum · Nominal diameter: 23 mm · Width: 66 mm · Height: 136 mm · Manufacturer: Polini · Total length: 71.3 mm · Mounting type: Plug connection clamped · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Hand choke · Area of application: High End · Nozzle thread: M5x0.8 (standard thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 110 · Ø Inside entrance: 23 mm · Ø Output inside: 23 mm · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Size of secondary nozzle: 40
EUR 177.20
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 3.30
VOCA silencer black with 3-point mount
Manufacturer: VOCA · Total length: 220 mm · Total length: 235 mm · Number of fixing points: 3 pcs · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Color: black · Ø inside: 20.3 mm · Ø Silencer: 60.8 mm · Ø bolt circle: 46 mm
EUR 106.30
Not in stock
VOCA silencer red with 3-point mount
Manufacturer: VOCA · Total length: 220 mm · Number of fixing points: 3 pcs · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Color: black · Color: red · Ø inside: 20.3 mm · Ø Silencer: 60.8 mm · Thread type: M6x1 (standard thread) · Ø bolt circle: 46 mm
EUR 106.30
Collection only possible with online purchase and appointment.
