19 mm tuning intake manifold for Puch X30 Sport mopeds / mopeds with Z50 engine and Puch Maxi models which have an E50 engine installed.
The CNC-milled intake manifold is designed for Dell'Orto PHBG carburettors and has a round opening on the cylinder side.
On the Puch X30 it is still possible to fit the original side skirts, but it is not possible to operate the hand choke or fit an air filter. Cable chokes and replicas of the carburetor with service hatch at the bottom cannot be fitted.
| Manufacturer | AKOA |
| Camouflaged | No |
| Material | Aluminum |
| Ø External connection | 24 mm |
| Ø inside | 19 mm |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 2 pcs |
| Area of application | Tuning |
| Total height | 68 mm |
| Height flange center hole | 57 mm |
| Mounting type | Nuts |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Total length: 82 mm · Height: 124 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Size of secondary nozzle: 45
EUR 142.30
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
EUR 24.80
swiing® ingenious intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Ø inside: 16 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total length: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Total height: 70 mm
EUR 59.20
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: PHBG AS · Total length: 71.5 mm · Color: black · Nominal diameter: 19.5 mm · Ø without reducing sleeve: 26 mm · Width: 71 mm · Height: 123 mm · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Mounting type: Plug connection clamped · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Nozzle size: 85 · Size of secondary nozzle: 50
EUR 94.80
swiing® ingenious intake manifold 15 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 70 mm · Total length: 48 mm · Area of application: Tuning
EUR 82.90
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Manufacturer: AKOA · Camouflaged: No · Material: Aluminum · Ø External connection: 24 mm · Ø inside: 19 mm · Hole spacing inlet: 38 mm · Area of application: Tuning · Number of fixing points: 2 pcs · Total height: 68 mm · Height flange center hole: 57 mm · Mounting type: Nuts
EUR 82.90
Explore categories from Carburetor & intake system
Moped fans also bought
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Thread length: 12 mm
EUR 2.15
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Total length: 82 mm · Height: 124 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Size of secondary nozzle: 45
EUR 142.30
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 2.85
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple shape: Pears · Cable length: 2200 mm · Area of application: Standard
EUR 2.85
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple shape: Barrel (transverse) · Cable length: 1600 mm · Area of application: Standard
EUR 2.85
Working late? Evening hours on Thursday until 20:00
