Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify the tuning of the carburetor and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 66
Side nozzle size: 42
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
| Manufacturer | Polini |
| Camouflaged | No |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Nominal diameter | 19 mm |
| Ø Internal connection | 24 mm |
| Ø without reducing sleeve | 26 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 46 mm |
| Width | 66 mm |
| Ø fuel hose connection | 7 mm, 6 mm |
| Total length | 73.5 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 66 |
| Size of secondary nozzle | 42 |
| Mounting type | Plug connection clamped |
| Height | 135 mm |
| Area of application | Tuning, Racing, Performance, High End |
Accessories & related products
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Material: Aluminum · Material: Plastic · Manufacturer: Polini · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Thread type: M5x0.8 (standard thread) · Thick membrane platelets: 0.3 mm · Ø outside: 24 mm · Ø mounting hole: 5.2 mm · Ø inside: 28.6 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Racing · Area of application: Tuning
EUR 166.00
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue) · Nipple length: 5 mm
EUR 2.85
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Color: black-matt · Ø inside: 20.7 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Ø External connection: 26 mm · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 35.50
Intake manifold 46 / 47 mm cylinder | Puch
Material: Aluminum · Camouflaged: No · Area of application: Tuning · Ø inside: 19 mm · Total length: 60 mm · Mounting type: Screws · Total height: 75 mm · Number of fixing points: 2 pcs · Height flange center hole: 65 mm · Ø External connection: 24 mm · Hole spacing inlet: 38 mm
EUR 47.30
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 47.30
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Quantity: 10 pcs · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Drive: External hexagon · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78
EUR 47.30
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm
EUR 474.50
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Material: Aluminum · Material: Plastic · Manufacturer: Polini · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Thread type: M5x0.8 (standard thread) · Thick membrane platelets: 0.3 mm · Ø outside: 24 mm · Ø mounting hole: 5.2 mm · Ø inside: 28.6 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Racing · Area of application: Tuning
EUR 166.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
