46 mm racing cylinder from Airsal suitable for Puch Maxi S & N, X30 Sport.
The racing kit has a straight exhaust, which is why standard exhausts for Puch mopeds can be fitted.
This is the largest possible racing kit that can be fitted without having to remove the engine housing.
| Nominal diameter | 46 mm |
| Manufacturer | Airsal |
| Material | Aluminum |
| Surface | sandblasted |
| Area of application | Tuning |
| Crankshaft stroke | 43 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 38 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Camouflaged | No |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Airsal piston 46 mm | Puch
Nominal diameter: 46 mm · Manufacturer: Airsal · Ø outside piston (A): 45.95 mm · Compression height (C): 21.8 mm · Curvature (D): 3.7 mm · Total piston height (E): 48.6 mm · Number of piston rings (F): 1 pcs · Piston ring mold: L-ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 98 g
EUR 45.00
Airsal cylinder head 46 / 47 mm | Puch
Total length: 180 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø cylinder: 46 - 47 mm · Width: 165 mm · Height: 60 mm · Number of fixing points: 4 pcs · Ø screw holder: 7.2 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 62.80
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.10
Not in stock
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Nominal diameter: 19 mm · Carburetor type: PHBG CS · Mounting type: Plug connection clamped · Choke control: Hand choke · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Total length: 82 mm · Ø Output inside: 19 mm · Height: 124 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Width: 70 mm · Area of application: Racing · Area of application: Tuning · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Size of secondary nozzle: 45
EUR 142.30
Airsal intake manifold 46 / 47 mm cylinder | Puch
Ø inside: 19 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Ø External connection: 24 mm · Total length: 60 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Height flange center hole: 65 mm · Mounting type: Screws · Total height: 75 mm · Camouflaged: No
EUR 47.40
Collection only possible with online purchase and appointment.
