High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Mounting type | Nuts |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 30 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Total length: 830 mm · Manufacturer: Simonini · Material: Steel · Surface: varnished · Mounting type: Welded lug · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Ø outside: 95 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 219.40
HOMOET Exhaust "P6 Special" 28 mm polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: blank · Total length: 935 mm · Ø Silencer: 50 mm · Ø outside: 88 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø Internal connection: 24 mm · Mounting type: Welded lug · Flame tube attachment: Flange
EUR 349.90
Hot 
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Ø outside: 88 mm · Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Total length: 900 mm · Mounting type: Tab · Ø Silencer: 50 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
EUR 338.00
AKOA exhaust "Streetpower" | Puch Maxi S
Manufacturer: AKOA · Material: Steel · Surface: blank · Total length: 940 mm · Ø Silencer: 60 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Ø Internal connection: 28 mm · Mounting type: Nuts
EUR 403.30
Not in stock
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Total length: 28 mm · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Area of application: Tuning
EUR 21.20
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 2.85
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple shape: Barrel (transverse) · Cable length: 1600 mm · Area of application: Standard
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Drive: Slot · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.35
GPO 85° Carburetor Elbow M6x0.75
Ø outside: 6 mm · Manufacturer: GPO · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Total length: 45.5 mm · Total length: 53.5 mm · Thread type: MF6x0.75 (fine pitch thread) · Height: 30 mm · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.00
Polini CP 21 mm carburetor (hand choke) rubber flange
Width: 66 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 21 mm · Carburetor type: CP · Total length: 71 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Rubber sleeve · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 100 · Height: 132 mm · Ø Inside entrance: 42 mm · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 40
EUR 166.00
Not in stock
Polini 43.5 mm cylinder kit reed valve with head | Puch
Manufacturer: Polini · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Nominal diameter: 43.5 mm · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Area of application: Racing · Area of application: Tuning · Camouflaged: No
EUR 474.50
Working late? Evening hours on Thursday until 20:00
