Aluminum stroke plate for your Zündapp Belmondo, Bergsteiger moped / moped with type 247 engine.
The spacer is mounted under the cylinder base. The "lifting" of the cylinder increases the intake and exhaust timing. Accordingly, the same distance of the spacer should be turned down at the top of the cylinder
so that the original squish edge dimension and compression ratio are maintained.
Material thickness (selection): 0.5 / 1.0 / 1.5 / 2.0 mm
Material: aluminum
Ø cylinder neck: 50 mm
Number of attachment points: 4 pieces
Matching cylinders, sealant and alternative stroke plates in various thicknesses can be found in the accessories section.
Exclusive product for the highest demands from the quality brand swiing®.
| Place of use | Cylinder base |
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | raw |
| Ø cylinder | 50 mm |
| Area of application | Tuning |
| Thickness | 0.5 mm, 1 mm, 1.5 mm, 2 mm |
| Zündapp | Belmondo (Type 247-71) Moped 25 (M 25) / Moped M 50 Bergsteiger (Type 247-434) |
Ratings
Accessories & related products
swiing® ingenious 39 mm cylinder kit tuning with head | Zündapp Bergsteiger
Nominal diameter: 39 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No
EUR 259.30
swiing® ingenious 44 mm cylinder kit tuning with head | Zündapp Bergsteiger
Nominal diameter: 44 mm · Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Displacement: 65 ccm · Crankshaft stroke: 42 mm · Surface: sandblasted · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No
EUR 276.60
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C
EUR 26.40
EUR 377.14/l
swiing® ingenious lifting plate 2 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Area of application: Tuning · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 22.90
swiing® ingenious lifting plate 1.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Area of application: Tuning · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 22.90
swiing® ingenious lifting plate 1 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Area of application: Tuning · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 22.90
swiing® ingenious lifting plate 0.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder base · Surface: raw · Area of application: Tuning · Ø cylinder: 50 mm · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 22.90
Explore categories from Cylinder
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
EUR 11.40
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.40
EUR 25.33/l
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Total length: 35 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Ø inside: 16 mm · Ø External connection: 23 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing inlet: 40 mm · Total height: 42 mm · Height flange center hole: 35 mm
EUR 46.00
Collection only possible with online purchase and appointment.
