Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin length to heel: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Diameter | 19 mm |
| Material | Steel |
| Surface | galvanized (blue), rubberized |
| Number of components | 1 pcs |
| Ø outside | 93 mm |
| Total length | 290 mm |
| Height | 80 mm |
| Ø inside | 27 mm |
| Thickness | 5 mm |
| Area of application | Special tool |
| Ø Pin | 8 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5
EUR 113.50
Bosch flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Material: Steel · Ø Internal flywheel: 91.2 mm · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: right · Height: 36.6 mm · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Ø Flywheel outside: 115.8 mm · Cone length: 17.8 mm · Cone ratio: 1:5 · Weight: 900 g · Thread length: 6.5 mm
EUR 254.40
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 10.50
EUR 11.70
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Area of application: (Dis)assembly tool
EUR 52.00
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Total length: 83 mm · Width across flats SW: 17 mm · Area of application: Special tool
EUR 10.10
EUR 11.30
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Strength class: 8.8 · Material: Steel · Total length: 57 mm · Surface: blackened · Area of application: (Dis)assembly tool
EUR 23.60
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Number of components: 4 pcs · Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Area of application: Special tool · Thread type: M6x1 (standard thread) · Height: 16 mm · Ø outside: 75 mm · Ø inside: 64 mm · Thread length: 40 mm · Sachs OEM no.: 0276 057 000
EUR 35.40
Not in stock
GPO piston pin extractor Ø 10, 12, 14 mm
Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Manufacturer: GPO · Material: Steel · Number of components: 7 pcs · Total length: 130 mm · Surface: burnished · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Area of application: (Dis)assembly tool
EUR 21.20
EUR 23.60
Collection only possible with online purchase and appointment.
