Hot 
High-end crankshaft suitable for manual Sachs 503 2 AL, 2 BL mopeds / mopeds.
The limited "Wolfram Edition" of the previously offered 2.0 racing crankshaft version is an extremely precise and finely balanced crankshaft, specially developed for racing.
The balancing bores are sealed with the heavy metal tungsten, which achieves an absolutely perfect balancing ratio and therefore smooth running with minimal vibrations.
The balancing ratio of the racing shaft has been specially adapted to cylinders with a diameter of 41 mm. The solid connecting rod is equipped with a more stable 16 mm connecting rod bolt and an additional slotted connecting rod foot. In addition, the connecting rod bearings are made of silver and are characterized by excellent emergency running properties.
The needle bearing (12/15 x14.2 mm) is included in the scope of delivery.
The matching bearings and oil seals can be found in the accessories section.
Installation tip:The transition between the crank webs and the crankpin is provided with a slight radius for reinforcement. In order to be able to distance cleanly, a 16 x 1 mm spacer washer should be used first on the left and right; this is placed cleanly over the chamfer and is therefore also perfectly centered. The other spacers can be used as normal with Ø 15 mm.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Cheek type | standard |
| Crankshaft stroke | 42 mm |
| Connecting rod length center-center | 85 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Total length of crankpin on clutch side | 43.1 mm |
| Number of gears | 2 pcs |
| Total length crankpin ignition side | 63.4 mm |
| Ø crank webs | 85 mm |
| Ø piston pin (B) | 12 mm |
| Thread length | 8 mm, 12 mm |
| Area of application | High End |
| Ø Connecting rod eye | 15 mm |
| Ø Bearing seat (clutch side) | 15 mm |
| Ø Bearing seat (ignition side) | 15 mm |
| Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
| Wide crank webs | 30 mm |
| Length 1st paragraph | 21 mm |
| Length 2nd paragraph | 14 mm |
| Ø 1st step (on the coupling side) | 15 mm |
| Ø 2nd shoulder (on the clutch side) | 12 mm |
| Length of shoulder (ignition side) | 34 mm |
| Weight | 901 g |
Suitable for the following models
| Sachs | 503 - 2AL / 2BL |
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Number of components: 1 pcs · Total length: 120 mm · Surface: galvanized (blue) · Area of application: (Dis)assembly tool
EUR 52.00
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Manufacturer: swiing® revival parts · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm · Material: Steel · Nominal diameter inside: 13 mm · Surface: blank / oiled · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Ø outside: 18 mm · Ø outside: 21 mm
EUR 20.00
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Place of use: Carburetor · Material: Rubber · Color: black · Number of components: 1 pcs · Surface: raw · Cord thickness: 1.4 mm · Ø inside: 17.2 mm · Ø outside: 20 mm · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.40
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Stock number: BO15 · Bearing type: Shoulder bearing · Surface: blank · Width: 10 mm · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.50
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard
EUR 47.20
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Manufacturer: swiing® revival parts · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm · Material: Steel · Nominal diameter inside: 13 mm · Surface: blank / oiled · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Ø outside: 18 mm · Ø outside: 21 mm
EUR 20.00
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Area of application: Standard · Recording type: Interlocking · Ø outside: 93.7 mm · Ø inside: 29.7 mm · Ø inside: 36 mm · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 31.40
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Thread type: MF20.8x1 LH (fine/left-hand thread) · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Stock number: E15 · Bearing type: Deep groove ball bearing · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 59.10
Collection only possible with online purchase and appointment.
