Original second-generation Sachs coaster-brake rear hub with a die-cast zinc housing, compatible with Swiss mopeds equipped with Sachs 504 HG engines and 17-inch rims.
If the sprocket is replaced, the hub can also be used on Puch X30 Sport models.
The 50-tooth sprocket is riveted and can be replaced.
The coaster brake hub is shipped without a brake anchor plate. The wheel axle, including all internal components, is included.
Note: New coaster hubs must be installed by a qualified technician in accordance with the relevant factory documentation. Bearing play must be checked after installing the brake anchor plate and readjusted if necessary. You’ll find our tutorial on this below. Improper handling and any resulting damage do not constitute grounds for a warranty claim.
Additional hub bodies, an alternative sprocket, and matching screws, as well as a brake pad and maintenance kits, can be found in the accessories section.
NOS – New Old Stock.
| Thread type | MF10.5x1 (fine pitch thread) |
| Manufacturer | Sachs |
| Surface | galvanized (blue), chrome-plated |
| Ø axle | 10.5 mm |
| Ø bolt circle | 105.5 mm |
| Ø drum | 90 mm |
| Number of spoke holes | 36 pcs |
| Area of application | Original |
| Sachs |
Accessories & related products
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm
EUR 28.40
Not in stock
swiing® revival screw set for sprocket mounting coaster brake
Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Number of components: 12 pcs · Color: gray · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 6 mm · Shank: No · Width across flats: 8 mm · Width across flats: 10 mm · Thread length: 12 mm
EUR 23.60
ESJOT Gear Ring, 50 Teeth, Reverse, Galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 50 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Thickness: 4.3 mm · Ø mounting hole: 6.4 mm · Ø inside: 94 mm
EUR 77.00
Coaster hub with sprocket 37 T. NOS | Zündapp Belmondo / Hercules
Manufacturer: Sachs · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Area of application: Original · Ø axle: 10.5 mm · Ø drum: 90 mm · Ø bolt circle: 105.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Number of spoke holes: 36 pcs
EUR 830.40
Rear Hub with 50-Tooth Sprocket for 17" NOS | Sachs 504 HG
Manufacturer: Sachs · Surface: chrome-plated · Surface: galvanized (blue) · Area of application: Original · Ø axle: 10.5 mm · Ø drum: 90 mm · Ø bolt circle: 105.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Number of spoke holes: 36 pcs
EUR 830.40
Explore categories from Hub & axle
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Color: gray · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 40.20
ESJOT Gear Ring, 40 Teeth, Reverse, Galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 40 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Thickness: 4.2 mm · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm · Ø inside: 94 mm
EUR 59.20
swiing® ingenious screw set for sprocket mounting coaster brake racing
Thread type: M6x1 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Surface: raw · Number of components: 12 pcs · Color: gray · Color: silver · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 6 mm · Shank: No · Width across flats: 8 mm · Width across flats: 10 mm · Thread length: 18 mm
EUR 23.60
hünersdorff fuel can "Fuel Friend" 0.5 L transparent with filler neck
Manufacturer: hünersdorff · Material: Polyethylene (PE) · Surface: raw · Color: red · Color: transparent · Capacity: 500 ml · Mass display: Liter · Depth: 60 mm · Width: 95 mm · Height: 130 mm · Height: 180 mm · Area of application: Road use
EUR 21.20
Working late? Evening hours on Thursday until 20:00
