Polini CP 19 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main jet: 90
Installed secondary jet: 40
Ø Nominal: 19 mm
Ø Air filter connection: 46 mm
Ø Intake manifold connection: 25 mm
Alternative racing carburetors, the sleeve for installation and the matching nozzles can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 19 mm |
| Width | 66 mm |
| Height | 132 mm |
| Manufacturer | Polini |
| Area of application | Tuning, Racing, Performance |
| Component group Carburetor | Carburetor complete |
| Material | Aluminum |
| Carburetor type | CP |
| Total length | 71 mm |
| Ø Inside entrance | 42 mm |
| Ø Output inside | 21.8 mm |
| Ø Air filter connection | 47 mm |
| Mounting type | Rubber sleeve |
| Ø fuel hose connection | 6 mm, 7 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 90 |
| Camouflaged | No |
| Size of secondary nozzle | 40 |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Nominal diameter: 17.5 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: CP · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 62 · Area of application: Tuning · Size of secondary nozzle: 40
EUR 166.00
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 47.30
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
EUR 47.30
Not in stock
Polini 26 mm carburetor (hand choke)
Nominal diameter: 26 mm · Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 83 mm · Mixed oil connection: Yes · Width: 65 mm · Vacuum connection: Yes · Height: 155 mm · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 105 · Size of secondary nozzle: 45
EUR 171.90
Polini CP 15 mm carburetor (hand choke) rubber flange
Nominal diameter: 15 mm · Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: CP · Ø Inside entrance: 42 mm · Ø Output inside: 21 mm · Mounting type: Rubber sleeve · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 71 mm · Mixed oil connection: Yes · Width: 66 mm · Vacuum connection: Yes · Height: 132 mm · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 70 · Size of secondary nozzle: 36
EUR 160.10
Polini CP 17.5 mm carburetor (hand choke) rubber flange
Nominal diameter: 17.5 mm · Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: CP · Ø Inside entrance: 42 mm · Ø Output inside: 21.5 mm · Mounting type: Rubber sleeve · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 71 mm · Mixed oil connection: Yes · Width: 66 mm · Vacuum connection: Yes · Height: 132 mm · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 80 · Size of secondary nozzle: 36
EUR 166.00
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Material: Steel · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Area of application: Standard
EUR 2.85
Inox
Hot
Bumm mirror round Inox
Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Color: Chrome · Manufacturer: Bumm · Test mark: none · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Clamping diameter: 22 mm · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Thread size: M8 · Total length: 360 mm
EUR 33.10
Dell'Orto 17.5 mm PHBG carburetor cable choke
Nominal diameter: 17.5 mm · Width: 75 mm · Height: 130 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Carburetor type: PHBG · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82 · Size of secondary nozzle: 55 · Area of application: Tuning
EUR 148.20
Not in stock
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 47.30
Bumm mirror round Inox black
Mirror property: none · Manufacturer: Bumm · Material: Steel · Test mark: none · Color: black-matt · Surface: varnished · Clamping diameter: 22 mm · Ø mirror surface: 98 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Thread size: M8 · Thread type: M8x1.25 (standard thread) · Total length: 350 mm
EUR 35.50
Working late? Evening hours on Thursday until 20:00
