Polini CP 17.5 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main nozzle: 80
Installed secondary nozzle: 36
Ø Nominal: 17.5 mm
Ø Connection air filter: 46 mm
Ø Connection intake manifold: 25 mm
Alternative racing carburetors, the sleeve for mounting and the matching nozzles can be found under accessories.
Quality product from the Italian manufacturer Polini.
Details
| Total length | 71 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Nominal diameter | 17.5 mm |
| Width | 66 mm |
| Nozzle block | 35-12 |
| Carburetor type | CP |
| Height | 132 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Ø Inside entrance | 42 mm |
| Ø Output inside | 21.5 mm |
| Mounting type | Rubber sleeve |
| Ø Air filter connection | 47 mm |
| Area of application | Tuning, Racing, Performance |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 80 |
| Camouflaged | No |
| Size of secondary nozzle | 36 |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nominal diameter: 17.5 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 62 · Size of secondary nozzle: 40 · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 165.60
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 54 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Drive: External hexagon
EUR 47.20
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Drive: External hexagon
EUR 47.20
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nominal diameter: 26 mm · Carburetor type: Flat slide valve · Width: 65 mm · Choke control: Hand choke · Height: 155 mm · Total length: 83 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Camouflaged: No · Nozzle size: 105 · Size of secondary nozzle: 45
EUR 171.50
Not in stock
Polini CP 15 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: CP · Width: 66 mm · Choke control: Hand choke · Height: 132 mm · Total length: 71 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 42 mm · Mounting type: Rubber sleeve · Ø Output inside: 21 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 70 · Size of secondary nozzle: 36
EUR 159.70
Polini CP 19 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nominal diameter: 19 mm · Carburetor type: CP · Width: 66 mm · Choke control: Hand choke · Height: 132 mm · Total length: 71 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 42 mm · Mounting type: Rubber sleeve · Ø Output inside: 21.8 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 90 · Size of secondary nozzle: 40
EUR 177.50
Moped fans like you also bought:
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Material: Plastic · Material: Steel · Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Ignition system: BOSCH · Ignition system: DUCATI · Ø outside: 130 mm · Height: 88 mm · Total length: 160 mm · Hole spacing: 137.5 mm · Width: 150 mm · Number of fixing points: 2 pcs · Color: Chrome · Color: black-matt
EUR 177.50
Not in stock
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 40 pcs · Ø bolt circle: 106 mm · Ø inside: 94 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 23.60
Fuel tap horizontal M16x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF16x1 (fine pitch thread)
EUR 15.30
Not in stock
Collection only possible with online purchase and appointment.
