Hot 
One of the best clutches available for the Puch E50 engine.
Qualitatively very high quality.
Three different spring strengths are included for the corresponding application range, with the heaviest springs you can achieve a clutch engagement speed of approx. 5000 rpm
The low-wear copper linings provide the necessary grip.
Weight: 440 grams. Lightweight construction, ideal for any racing moped.
We recommend using the clutch only from 65 cc. For smaller cylinders, the centrifugal clutch tends to be too hard, which can lead to too much slippage.
We recommend rounding off the holes in the linings into which the springs are inserted.
This ensures that the springs are not damaged and will hold even under heavy loads.
Quality product from the American manufacturer Jammer Clutches.
| Manufacturer | Jammer |
| Material | Steel |
| Material addition | Steel |
| Number of springs | 3 pcs |
| Area of application | Racing, High End, Tuning, MX |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Ø outside | 92.5 mm |
| Thickness | 19 mm |
| Puch | E50 |
Accessories & related products
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Number of jaws: 3 pcs · Recording type: Interlocking · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 224.50
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Color: red · Color: white · Color: yellow · Surface: varnished · Total length: 32.6 mm · Area of application: Tuning
EUR 35.30
Moped fans also bought
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11.70
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.60
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Choke control: Hand choke · Ø fuel hose connection: 5 mm · Total length: 65 mm · Ø Inside entrance: 17 mm · Width: 47 mm · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 109 mm · Ø Air filter connection: 27.5 mm · Ø Internal connection: 23 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 141.70
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 17 mm · Ø External connection: 23 mm · Total length: 38 mm · Hole spacing inlet: 38 mm · Height flange center hole: 42 mm · Total height: 53.5 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 53.10
Rito crankshaft full cheeks with mounted bearings | Puch E50
Manufacturer: Rito · Area of application: High End · Material: Steel · Cheek type: Full cheeks · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 10 mm · Dimension needle bearing: 12 / 15 x 14.2 (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm
EUR 236.30
Collection only possible with online purchase and appointment.
