
Three clutch springs suitable for the Jammer racing clutch of your Puch Maxi S and N moped / moped with E50 engine.
These medium-strength springs for the centrifugal clutch change the clutch engagement behavior so that a higher speed is required until the clutch engages.
Note: We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
Other clutch spring sets and complete racing clutches can be found in the accessories section.
Quality product from the American manufacturer Jammer Clutches.
| Spring design | Tension spring |
| Length spring hook | 10.8 mm |
| Leg length | 13.5 mm, 9.6 mm |
| Ø wire | 1.6 mm |
| Manufacturer | Jammer |
| Material | Spring steel |
| Area of application | Tuning |
| Color | green |
| Ø outside | 11 mm |
| Surface | varnished |
| Ø inside | 7.4 mm |
| Total length | 37 mm |
| Puch | E50 |
Accessories & related products
Clutch Squeal in 1st Gear | Tomos A35, A55
Manufacturer: Jammer · Material: Aramid (colloquially known as Kevlar) · Material: Steel · Number of jaws: 3 pcs · Ø outside: 84.75 mm · Recording type: Interlocking · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 213.50
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Total length: 32.6 mm · Area of application: Tuning
EUR 35.50
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.1 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Color: pink · Ø inside: 7.7 mm · Ø outside: 9.9 mm · Total length: 34 mm · Area of application: Tuning
EUR 14.10
Explore categories from Clutch
Moped fans also bought
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Ø inside: 14.5 mm · Total length: 47 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Total height: 54 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 14.10
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.80
Handlebar fork plate 35 cm curved with chrome strut
Ø outside: 22 mm · Width: 720 mm · Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Fork plate holder length: 90 mm · Clamping diameter: 22 mm · Height: 350 mm · Length handlebar ends: 150 mm · Mounting type: Fork plate · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 260 mm
EUR 43.80
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Color: blue · Ø inside: 7.3 mm · Ø outside: 9.9 mm · Total length: 34 mm
EUR 14.10








