profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
hs-retro-400px

For: Puch

32378

HS-Retro primary wheel 69 teeth | Puch X30 NS, NL

EUR 198.00

Incl. 21% VAT.

Description

Gearwheel of the primary drive for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This drive wheel is used in combination with clutch pistons, which have 19 teeth.

Number of teeth: 69
Toothing: helical
Mounting: 3-prong profile

Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the clutch basket.

The fastening nut and other parts can be found under accessories.

Original Puch spare part number: 349.3.13.200.1

ManufacturerHS-Retro
MaterialSteel
Toothing typehelical toothed
Ø inside12.5 mm
Recording type3-tooth splined shaft holder
Number of teeth69 pcs
Ø outside95 mm
Puch OEM number349.3.13.200.1
Puch

Z50 (X30 Sport)

Accessories & related products

Cylindrical roller Ø 3.5 x 7.5 Gearbox | Puch Z50
undefined

For: Puch

11498

Cylindrical roller Ø 3.5 x 7.5 Gearbox | Puch Z50

Manufacturer: Puch · Material: Steel · Surface: Hardened · Diameter: 3.5 mm · Width: 7.4 mm · Area of application: Standard

EUR 1.70

M10 locking plate gear wheel 3 teeth | Puch X30 Velux

For: Puch

12276

M10 locking plate gear wheel 3 teeth | Puch X30 Velux

Material: Steel · Ø inside: 10.3 mm · Number of lobes: 3 pcs · Nominal diameter (thread): 10 mm · Thread size: M10

EUR 8.20

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50
undefined

For: Puch

24082

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50

Manufacturer: swiing® revival parts · Thickness: 1.5 mm · Thickness: 2.5 mm · Ø outside: 70 mm · Ø outside: 75 mm · Number of slats: 2 pcs · Ø inside: 46 mm · Ø inside: 51 mm

EUR 40.20

Normio M10x1 Galvanized Nut
undefined

Universal

24185

Normio M10x1 Galvanized Nut

Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: External hexagon · Width across flats: 17 mm · Height: 8 mm · Tomos OEM number: 215487

EUR 3.45

GPO gear holder countershaft Puch X30 Sport
undefined

For: Puch

24760

GPO gear holder countershaft Puch X30 Sport

Manufacturer: GPO · Area of application: (Dis)assembly tool

EUR 35.50

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32368

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Ø inside: 13.35 mm · Recording type: Cross shot · Width: 8 mm · Ø outside: 43 mm · Puch OEM number: 050.1.1410

EUR 87.20

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32371

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Ø inside: 23.8 mm · Width: 7.55 mm · Ø outside: 31.98 mm · Puch OEM number: 329.1.13.065.1

EUR 69.90

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32372

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Ø inside: 19.44 mm · Width: 7.5 mm · Ø outside: 28.1 mm · Puch OEM number: 329.1.13.010.1

EUR 53.30

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32373

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Toothing type: straight toothed · Ø inside: 12.4 mm · Number of teeth: 28 pcs · Ø axle: 12.4 mm · Ø outside: 54 mm · Puch OEM number: 350.1.13.011.1

EUR 126.80

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
undefined

For: Puch

32379

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50

Ø inside: 17 mm · Manufacturer: HS-Retro · Material: Steel · Toothing type: helical toothed · Height: 26.6 mm · Ø outside: 74.8 mm · Number of teeth: 19 pcs · Area of application: High End · Area of application: Original · Puch OEM number: 350.1.12.002.2

EUR 189.70

Explore categories from Gearbox & housing (motor)

S-10-30-020-010_Anlauf-Passscheiben
Thrust & shim washers
S-10-30-020-020_Getriebe_Wellen
Gearboxes & shafts
S-10-30-020-030_Schaltmechanismus
Switching mechanism
S-10-30-020-040_Gehaeuseschalen
Housing shells
S-10-30-020-050_Kick_Pedal_Elektrostart
Kick- pedal- & electric start
S-10-30-020-060_Motoraufhaengung
Motor suspension
Flat gasket
Simmerrings
Seals & O-rings
Dichtsatz
Revisionsset

Moped fans also bought

Exhaust 22 mm original 2-piece | Puch X30 Sport NS, NL
undefined

For: Puch

10005

Exhaust 22 mm original 2-piece | Puch X30 Sport NS, NL

Manufacturer: Puch · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Flame tube attachment: Flange

EUR 189.70

Inox
Hot Hot
GPO license plate holder Inox (CH version)
undefined

Universal

10041

GPO license plate holder Inox (CH version)

Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread length: 8 mm · Mounting type: Nuts & bolts

EUR 12.90

Airsal 46 mm cylinder kit straight exhaust | Puch
undefined

For: Puch

10059

Airsal 46 mm cylinder kit straight exhaust | Puch

Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 46 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 38 mm · Area of application: Tuning

EUR 207.50

swiing® revival plain bearing clutch basket | Puch Z50
undefined

For: Puch

10235

swiing® revival plain bearing clutch basket | Puch Z50

Manufacturer: swiing® revival parts · Material: special bearing bronze · Nominal diameter inside: 15 mm · Ø inside: 15 mm · Ø outside: 17 mm · Total height: 16.2 mm

EUR 12.90

swiing® revival Spring Basket, 2-leaf, tall version | Puch Z50 / EX30 (Z50)
undefined

For: Puch

17698

swiing® revival Spring Basket, 2-leaf, tall version | Puch Z50 / EX30 (Z50)

Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: red · Ø inside: 24.3 mm · Ø outside: 62 mm · Height: 28.5 mm · Area of application: Standard · Puch OEM number: 343.1.12.005.1

EUR 59.20

swiing® revival Spring Basket, 2-leaf, low profile | Puch Z50 / EX30 (Z50)
undefined

For: Puch

18710

swiing® revival Spring Basket, 2-leaf, low profile | Puch Z50 / EX30 (Z50)

Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Standard · Surface: anodized · Color: red · Ø inside: 24.3 mm · Height: 25.95 mm · Ø outside: 62 mm · Puch OEM number: 050.1205

EUR 41.40

Surflex clutch plate set | Puch Z50
undefined

For: Puch

22809

Surflex clutch plate set | Puch Z50

Manufacturer: Surflex · Material: Composite materials · Area of application: Original · Material: Steel · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 2.75 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm

EUR 41.40

Not in stock

swiing® ingenious clutch spring reinforced +40% | Puch Z50
undefined

For: Puch

24034

swiing® ingenious clutch spring reinforced +40% | Puch Z50

Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Number of components: 1 pcs · Color: red · Ø inside: 30 mm · Ø wire: 4.5 mm · Total length: 23.5 mm · Ø outside: 39 mm

EUR 28.40

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
undefined

For: Puch

32379

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50

Ø inside: 17 mm · Manufacturer: HS-Retro · Material: Steel · Toothing type: helical toothed · Height: 26.6 mm · Ø outside: 74.8 mm · Number of teeth: 19 pcs · Area of application: High End · Area of application: Original · Puch OEM number: 350.1.12.002.2

EUR 189.70