Black M6 x 62 mm threaded bolt made of reinforced special steel, 62 mm long, for mounting cylinders and cylinder heads on various mopeds, mopeds, and small motorcycles.
Among other things, this threaded stud can be used for the 43 and 45 mm cylinder kits from the BAD ASS brand.
These stud bolts are also colloquially referred to as cylinder studs.
Price per piece.
You can find matching washers and nuts in the accessories section.
Good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Strength class | 10.9 |
| Diameter | 5.3 mm |
| Material | Steel |
| Surface | blackened |
| Thread type | M6x1 (standard thread) |
| Nominal diameter (thread) | 6 mm |
| Total length | 62 mm |
| Thread length | 11.8 mm, 7.8 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Washer M6 6.4/12/1.6 galvanized
Nominal diameter inside: 6 mm · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thickness: 1.6 mm · Hardness [HV]: 140 HV · Ø inside: 6.4 mm · Thread size: M6 · Ø outside: 12 mm · Pony OEM number: A4515 · Sachs OEM no.: 0944 142 002
EUR 0.45
Explore categories from Screws & fastener sets
Moped fans also bought
swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Union nut · Nominal diameter (thread): 40 mm · Height: 19 mm · Ø inside: 33.5 mm · Ø outside: 46 mm · Thread type: MF40x1.5 (fine pitch thread)
EUR 16.50
GPO sprocket 9 - 21 teeth wide | Puch
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Recording type: Interlocking · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
EUR 9.40
BAD ASS 43 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 43 mm · Manufacturer: BAD ASS · Area of application: Tuning · Material: Gray cast iron · Displacement: 61 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Camouflaged: No
EUR 284.60
BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Material: Gray cast iron · Displacement: 67 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Decompressor: No · Camouflaged: Yes
EUR 391.40
BAD ASS cylinder head XL Ø 45-47 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Ø cylinder: 45 - 47 mm · Height: 61 mm · Ø screw holder: 19.3 mm · Candle thread: short · Ø outside: 85.5 mm · Ø outside: 108 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 47 x 47 · Decompressor: M10x1.5
EUR 166.00
BAD ASS 45 mm cylinder "Diablo" incl. head | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Material: Gray cast iron · Displacement: 67 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 28 mm · Ø outlet inside: 28 mm · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Decompressor: No · Camouflaged: Yes
EUR 545.70
Working late? Evening hours on Thursday until 20:00
