21 mm PHBG replica racing carburetor for universal use for your moped, moped and small motorcycle.
This racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 75 cc.
The tuning carburetor has a cable-operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary air flow as well as the mixture adjustment screw.
The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.
Main thread size (M5): 90 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 60
Air filter connection diameter: 32 mm (M32 x 1.25)
Connection diameter of intake manifold: 24 mm (or 26 mm after removing the reducer sleeve)
Total height: 130 mm
Total width: 75 mm
Matching nozzles, air filters and intake manifolds can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Nominal diameter | 21 mm |
| Manufacturer | GPO |
| Component group Carburetor | Carburetor complete |
| Width | 75 mm |
| Carburetor type | PHBG AD |
| Nozzle size | 90 |
| Ø without reducing sleeve | 26 mm |
| Ø Air filter connection | 32 mm |
| Height | 130 mm |
| Ø Internal connection | 24 mm |
| Air filter connection thread | MF32x1.25 (fine pitch thread) |
| Ø fuel hose connection | 6 mm |
| Mixed oil connection | Yes |
| Mounting type | Plug connection clamped |
| Choke control | Cable choke |
| Area of application | Tuning |
| Choke nozzle size | 60 |
| Nozzle thread | M5x0.8 (standard thread) |
| Size of secondary nozzle | 50 |
Accessories & related products
GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Total height: 57 mm · Color: Chrome · Surface: polished · Ø inside: 18.8 mm · Number of fixing points: 2 pcs · Total length: 40 mm · Hole spacing inlet: 38 mm · Height flange center hole: 45 mm · Ø External connection: 23.9 mm · Mounting type: Screws · Area of application: Tuning
EUR 21.20
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Total length: 8 mm · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 24.80
Hot 
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle thread: M5x0.8 (standard thread)
EUR 24.80
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Material: Brass · Nozzle thread: M5x0.8 (standard thread)
EUR 24.80
swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120 · Nozzle thread: M5x0.8 (standard thread)
EUR 4.15
66HEROES Mushroom air filter grille 28 - 32 mm black
Manufacturer: 66HEROES · Camouflaged: No · Color: black · Material: Metal · Material: Rubber · Filter type: Grille · Total length: 114 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Ø outside: 60 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 18.90
Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70
EUR 5.80
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Ø wire: 2.4 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Ø inside: 25.5 mm · Ø outside: 30 mm · Total length: 125 mm · Surface: galvanized (blue)
EUR 5.80
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Color: blue · Surface: coated · Total length: 28 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Area of application: Tuning
EUR 21.20
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.80
Hot
Wippermann drive chain No.18 (double reinforced)
Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Rolling circumference: 1448 mm · Color: gray · Chain pitch: 1/2" x 3/16" · Number of chain links: 114 pcs · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 40.20
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 11.80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Drive: Slot · Surface: nickel-plated · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm · Ø outside: 5 mm
EUR 2.35
Intake manifold 46 / 47 mm cylinder | Puch
Mounting type: Screws · Number of fixing points: 2 pcs · Material: Aluminum · Total height: 75 mm · Area of application: Tuning · Ø inside: 19 mm · Ø External connection: 24 mm · Total length: 60 mm · Hole spacing inlet: 38 mm · Height flange center hole: 65 mm · Camouflaged: No
EUR 47.30
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Nominal diameter: 43 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 249.00
Working late? Evening hours on Thursday until 20:00
