
Chromed EBR fork with reinforced bars.
For various mopeds. E.g. Zündapp Belmondo, Sachs 50/2 etc.
Block to attach the brake anchor plate is located on the right side.
With clamp for attaching the handlebars to the fork plate.
Internal diameter head tube (for stem mounting): 22 mm
Head tube length: 19.5 cm
Total length: 60 cm
Head tube thread: M26x1
Find matching headset bearings below in the accessories section.
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Steel |
| Surface | chrome-plated |
| Adjustable | No |
| Ø spars | 28 mm |
| Spar end distance (center-center) | 140 mm |
| Ø outer head tube | 26.1 mm |
| Color | Chrome |
| Ø head tube inside | 22 mm |
| Head tube length | 192 mm |
| Thread length | 58 mm |
| Total length | 610 mm |
| Fork bridge - center wheel axle | 385 mm |
| Distance brake cam to wheel axle center-center | 82 mm |
| Thread type | MF26x1 (fine pitch thread) |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm
EUR 2.35
Handlebar fork plate 30 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 90 mm · Mounting type: Fork plate · Ø outside: 22 mm · Clamping diameter: 22 mm · Length handlebar ends: 155 mm · Width: 680 mm · Crossbar: Yes · Height: 270 mm · Ø inside (C): 14 mm · Total length over ends: 280 mm
EUR 39.00
Speedometer 60 km/h Ø 48 mm black / chrome
Depth: 50 mm · Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: red · Color: white · Maximum speed: 60 Km/h · Lighting: Light slit · Resonance: Yes · 4-edge speedometer cable: 1.8 mm · Ø Receptacle: 48 mm · Ø outside: 50.4 mm · Total height: 70 mm · Thread type: MF10x1 (fine pitch thread)
EUR 71.00
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 2200 mm
EUR 11.70
GPO steerer tube nut M26x1 closed fork plate chrome
Drive: External hexagon · Manufacturer: GPO · Material: Steel · Nut type: Cap nut · Width across flats SW: 30 mm · Surface: chrome-plated · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Thread type: MF26x1 (fine pitch thread) · Thread depth: 12 mm · Height: 13.8 mm · Area of application: Standard
EUR 11.70
Not in stock








