Gas cable pipe bend set incl. cable adjusting screw and rubber cap suitable for various mopeds, mopeds and small motorcycles with Dell'Orto carburettors.
The gas cable guide pipe has an M6 x 0.75 mm mounting thread.
Other carburetor elbows and throttle cables can be found in the accessories section.
Quality product from the Italian manufacturer Dell'Orto.
| Manufacturer | Dell'Orto |
| Ø outside | 6 mm |
| Total length | 36.5 mm, 42 mm |
| Width across flats nut | 7 mm |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | nickel-plated |
| Angle | 50 ° |
| Height | 40 mm, 48 mm |
| Internal thread | MF5x0.75 (fine pitch thread) |
| Thread type | MF6x0.75 (fine pitch thread) |
Accessories & related products
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 2.85
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 36.5 mm · Height: 40 mm · Total length: 42 mm · Height: 48 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 50 °
EUR 14.10
Nut M6x0.75 Carburetor pipe bend Dell'Orto SHA carburetor | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF6x0.75 (fine pitch thread) · Height: 3 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Width across flats: 8 mm
EUR 2.85
90° carburetor pipe bend M7x0.75
Ø outside: 7 mm · Width across flats nut: 8 mm · Width across flats nut: 10 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 90 ° · Carburetor type: 18 Catalyst · Carburetor type: 85 · Total length: 47 mm · Total length: 53.5 mm · Internal thread: MF6x0.75 (fine pitch thread) · Height: 29 mm · Thread type: MF7x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 14.10
swiing® revival 90° carburetor pipe bend M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 90 ° · Total length: 40 mm · Total length: 49 mm · Height: 32 mm · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm
EUR 8.20
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Thread type: M5x0.8 (standard thread) · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Color: silver · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm
EUR 12.90
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.35
Dell'Orto 57° / 70° carburetor elbow set M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 57 ° · Angle: 70 ° · Total length: 31 mm · Total length: 38 mm · Total length: 39 mm · Total length: 46 mm · Height: 33.5 mm · Height: 37 mm · Height: 37.5 mm · Height: 40 mm · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm
EUR 16.50
Dell'Orto 40° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 30.5 mm · Total length: 37.5 mm · Height: 57 mm · Height: 67 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 40 °
EUR 14.10
swiing® revival 80° carburetor pipe bend M6x0.75
Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 80 ° · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread)
EUR 8.20
Dell'Orto 30° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Height: 13 mm · Total length: 43 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 30 °
EUR 14.10
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 34.5 mm · Total length: 42 mm · Height: 56 mm · Height: 61 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 45 °
EUR 8.20
Working late? Evening hours on Thursday until 20:00
