profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
asp-puch-spare-parts-400px

For: Puch

35408

ASP clutch basket & spur gear set 19:94 teeth KTM SX50 CNC | Puch E50

EUR 391.40

Incl. 21% VAT.

Description

High-quality clutch basket with spur gear suitable for your Puch moped / moped with E50 3- and 4-bearing engine and KTM SX50 clutch

.

This set contains CNC-machined parts made of hardened steel, which have been specially designed for high loads. The straight-toothed gear wheel made of special steel impresses thanks to the finely ground teeth for optimum running smoothness and very low wear.
The small gear wheel attached to the clutch basket is firmly welded to the clutch basket and thus offers the optimum conditions for both an original setup and a tuning setup.

ManufacturerASP
MaterialSteel
Number of teeth19 pcs, 94 pcs
Surfacehardened & ground
Toothing typestraight toothed
Area of applicationTuning, Racing
Puch

E50

Accessories & related products

MBR clutch basket 18 teeth Racing straight short | Puch E50
undefined

For: Puch

21489

MBR clutch basket 18 teeth Racing straight short | Puch E50

Manufacturer: MBR · Toothing type: helical toothed · Number of teeth: 18 pcs · Area of application: Tuning

EUR 219.40

MBR spur gear 94 teeth "Racing" straight | Puch E50
undefined

For: Puch

21491

MBR spur gear 94 teeth "Racing" straight | Puch E50

Manufacturer: MBR · Material: Steel · Surface: hardened & ground · Number of teeth: 94 pcs · Recording type: Interlocking · Toothing type: straight toothed · Ø axle: 17 mm · Ø outside: 145 mm

EUR 237.20

MBR clutch basket & spur gear 18:94 teeth Racing straight short | Puch E50
undefined

For: Puch

21492

MBR clutch basket & spur gear 18:94 teeth Racing straight short | Puch E50

Manufacturer: MBR · Toothing type: straight toothed · Number of teeth: 18 pcs · Number of teeth: 94 pcs · Area of application: Tuning

EUR 450.80

MBR Clutch KTM SX50 | Puch E50
undefined

For: Puch

21498

MBR Clutch KTM SX50 | Puch E50

Manufacturer: MBR · Material addition: Aluminum · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning

EUR 403.30

ASP clutch basket & spur gear set 19:94 teeth CNC | Puch E50
undefined

For: Puch

35406

ASP clutch basket & spur gear set 19:94 teeth CNC | Puch E50

Manufacturer: ASP · Surface: hardened & ground · Material: Steel · Toothing type: straight toothed · Number of teeth: 19 pcs · Number of teeth: 94 pcs · Area of application: Tuning

EUR 391.40

Not in stock

ASP clutch basket & spur gear set 19:94 teeth Kickstart CNC | Puch E50
undefined

For: Puch

35407

ASP clutch basket & spur gear set 19:94 teeth Kickstart CNC | Puch E50

Manufacturer: ASP · Surface: hardened & ground · Material: Steel · Toothing type: straight toothed · Number of teeth: 19 pcs · Number of teeth: 94 pcs · Area of application: Racing · Area of application: Tuning

EUR 391.40

Hot Hot
ASP clutch conversion kit "woven" 2-jaw Aramid | Puch E50
undefined

For: Puch

35409

ASP clutch conversion kit "woven" 2-jaw Aramid | Puch E50

Manufacturer: ASP · Material addition: Aramid (colloquially known as Kevlar) · Material: Steel · Number of jaws: 2 pcs · Number of springs: 4 pcs · Thickness: 12 mm · Area of application: Racing · Area of application: Tuning

EUR 148.20

ASP plain bearing clutch basket | Puch E50
undefined

For: Puch

35764

ASP plain bearing clutch basket | Puch E50

Manufacturer: ASP · Material: special bearing bronze · Nominal diameter inside: 15 mm · Total height: 21.8 mm · Ø inside: 15 mm · Ø outside: 17 mm · Puch OEM number: 349.1.12.011.1 · Puch OEM number: 349.2.12.011.1

EUR 17.70

Explore categories from Gearbox & housing (motor)

S-10-30-020-010_Anlauf-Passscheiben
Thrust & shim washers
S-10-30-020-020_Getriebe_Wellen
Gearboxes & shafts
S-10-30-020-030_Schaltmechanismus
Switching mechanism
S-10-30-020-040_Gehaeuseschalen
Housing shells
S-10-30-020-050_Kick_Pedal_Elektrostart
Kick- pedal- & electric start
S-10-30-020-060_Motoraufhaengung
Motor suspension
Flat gasket
Simmerrings
Seals & O-rings
Dichtsatz
Revisionsset

Moped fans also bought

swiing® revival oil filler plug with sealing ring | Puch E50
undefined

For: Puch

10168

swiing® revival oil filler plug with sealing ring | Puch E50

Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Thread type: M10x1.5 (standard thread) · Nominal diameter (thread): 10 mm · Drive: Slot · Screw head: Lens head · Ø External head: 14 mm · Total length: 14.6 mm · Thread length: 6 mm · Number of components: 2 pcs · Puch OEM number: 364.1.10.660.1

EUR 4.65

Hot Hot
Motorex Automatic Motor Oil (ATF) 450 ml
undefined

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

EUR 12.90

EUR 28.67/l

Inox
MBR retaining plate shaft seal on ignition side "Racing" Inox
undefined

For: Puch

15216

MBR retaining plate shaft seal on ignition side "Racing" Inox

Manufacturer: MBR · Material: Chrome steel (colloquially known as stainless steel) · Surface: brushed · Color: silver · Ø inside: 25.3 mm · Ø outside: 89.4 mm · Area of application: Tuning · Number of fixing points: 4 pcs

EUR 22.40

Handlebar fork plate 30 cm curved with strut solid black

Universal

20605

Handlebar fork plate 30 cm curved with strut solid black

Color: black · Surface: varnished · Material: Steel · Fork plate holder length: 80 mm · Width: 640 mm · Height: 280 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Length handlebar ends: 190 mm · Mounting type: Fork plate · Crossbar: Yes · Ø Strut: 10 mm · Strut length: 200 mm

EUR 68.70

MBR Clutch KTM SX50 | Puch E50
undefined

For: Puch

21498

MBR Clutch KTM SX50 | Puch E50

Manufacturer: MBR · Material addition: Aluminum · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning

EUR 403.30

swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
undefined

For: Puch

26113

swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50

Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Cheek type: Full cheeks · Material: Steel · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Thread type: MF10x1 (fine pitch thread) · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Weight: 970 g · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Area of application: High End · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Thread length: 11 mm · Thread length: 15 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm

EUR 272.80

swiing® ingenious bearing & shaft seal set Racing C3 / FPM (old model) | Puch E50
undefined

For: Puch

27090

swiing® ingenious bearing & shaft seal set Racing C3 / FPM (old model) | Puch E50

Manufacturer: swiing® ingenious parts · Area of application: Racing · Number of components: 7 pcs

EUR 93.60