High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
Details
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Mounting type | Nuts |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø Silencer: 60 mm · Total length: 830 mm · Mounting type: Welded lug · Ø outside: 95 mm · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 218.90
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 349.10
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Surface: raw · Surface: varnished · Color: gray · Material: Steel · Total length: 900 mm · Ø Silencer: 50 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø outside: 88 mm · Mounting type: Tab · Flame tube attachment: Stud bolts & nuts
EUR 337.30
AKOA Exhaust Streetpower "handmade" | Puch Maxi N
Manufacturer: AKOA · Material: Steel · Surface: blank · Mounting type: Nuts · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Number of fixing points: 3 pcs · Total length: 940 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone
EUR 402.40
Moped fans like you also bought:
swiing® ingenious gasket outlet 28 mm graphite
Place of use: Exhaust · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Ø inside: 27.4 mm · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.75
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Number of components: 1 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.60
swiing® ingenious 45 mm cylinder kit 70 ccm CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23.6/21.2 x 14.7 · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Hole spacing inlet: 38 mm
EUR 118.30
Collection only possible with online purchase and appointment.
