43 mm tuning cylinder in the "Power Edition" version, made of aluminum with a 63 ccm displacement, suitable for mopeds equipped with Sachs 503 2AL, AAL, 2BL, or ABL CH engines.
The racing kit, made of cast aluminum with a nickel-silicon carbide coating (commonly known as Nikasil), offers a significant performance boost across the entire RPM range, with an emphasis on low RPMs and high torque. Compared to the original cylinder, the sealing has been removed from this racing cylinder and the intake port has been enlarged. The overflow channels, as well as the exhaust and intake ports, have been modified to optimize valve timing. In addition, the exhaust port has been designed at a more aerodynamic angle. All cylinder head covers can still be installed.
The inner geometry of the matching cylinder head has been adapted to the piston to ensure an optimal combustion process.
Please select from the drop-down menu whether you want a cylinder head with or without a decompressor.
The package includes the cylinder with the corresponding head, piston, piston rings, clips, bolts, studs, and the necessary gaskets for the cylinder base, intake, and cylinder head.
When you purchase this complete set, you’ll receive a substantial discount off the retail price of the individual parts.
Note: For Sachs 503 ABL engines, the engine block may need to be slightly ground down in the area of the cylinder neck. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find compatible cylinder heads and other versions in the accessories section.
Brand-name product from the manufacturer AKOA.
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
| Sachs | 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Width: 50 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 94.80
- 10 %
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503, Puch Velux
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Width: 47 mm · Mounting type: Plug connection clamped · Total length: 61.5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 112 mm · Ø Air filter connection: 23 mm · Ø Internal connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.30
EUR 128.00
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
EUR 213.50
- 11 %
Hot
swiing® ingenious intake manifold 17 mm short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 17 mm · Thread type: M6x1 (standard thread) · Ø External connection: 23 mm · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total length: 50 mm · Area of application: Racing · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 53.30
EUR 47.30
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Thread type: M6x1 (standard thread) · Ø External connection: 20 mm · Ø inside: 15 mm · Hole spacing inlet: 32 mm · Total length: 50 mm · Area of application: Tuning · Number of fixing points: 2 pcs · Alternative version of the Pony OEM number: A2177
EUR 53.30
EUR 47.30
swiing® ingenious decompressor set | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Copper · Material: Steel · Thread type: M10x1.5 (standard thread) · Ø outside: 14 mm · Width across flats: 14 mm · Area of application: Standard · Total length: 21.5 mm · Thread length: 14 mm · Sachs OEM no.: 0291 013 300
EUR 59.20
Not in stock
AKOA 38 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 249.00
AKOA 40 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 40 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 249.00
AKOA 41 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 249.00
Explore categories from Cylinder
Moped fans also bought
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Ø inside: 17.2 mm · Surface: raw · Ø outside: 20 mm · Cord thickness: 1.4 mm · Place of use: Carburetor · Area of application: Standard · Number of components: 1 pcs · Color: black · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.45
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Stock number: BO15 · Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Material: Brass · Material: Steel · Ø outside: 40 mm · Width: 10 mm · Ø inside: 15 mm · Area of application: Standard · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.50
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Filter type: Racing screen · Total length: 165 mm · Mounting type: Plug connection clamped · Width: 68 mm · Height: 52 mm · Ø Internal connection: 20 mm · Area of application: Tuning · Camouflaged: No
EUR 71.10
- 11 %
Hot
swiing® ingenious intake manifold 17 mm short version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 17 mm · Thread type: M6x1 (standard thread) · Ø External connection: 23 mm · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Total length: 50 mm · Area of application: Racing · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 53.30
EUR 47.30
AKOA 43 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Ø outside: 84 mm · Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 43 mm · Number of fixing points: 4 pcs · Height: 29 mm · Area of application: Tuning · Hole pattern [mm]: 37 x 37 · Candle thread: short · Decompressor: M10x1.5
EUR 71.10
AKOA 43 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Number of fixing points: 4 pcs · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Area of application: Tuning · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: No · Camouflaged: No
EUR 272.80
Working late? Evening hours on Thursday until 20:00
