Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Manufacturer | Xtreme |
Surface | varnished |
Color | black |
Damping type | Spring |
Mounting type | Nuts & bolts |
Adjustable | Yes |
Ø Fastening inside | 10 mm |
Ø spars | 28 mm |
Ø outside | 44 mm |
Hole spacing | 260 mm |
Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25.90
EUR 2’590.00/l
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Hole spacing: 260 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 59.00
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Total length: 15 mm · Ø outside: 8 mm · Area of application: Standard
EUR 2.95
Spotlight round Ø 13 cm chrome / black
Depth: 80 mm · Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Color: Chrome · Housing material: Metal · Color: black · Surface: chrome-plated · Color: transparent · Surface: varnished · Lens material: Plastic · Mounting type: Screws · Width: 134 mm · Ø outside: 130 mm · Height: 147 mm · Speedometer recording: None · Thread size: M6 · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Area of application: Standard
EUR 29.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.70
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø outside: 5 mm
EUR 2.35