Socket axle M12x218 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels and rear wheels. Due to the large width, it is increasingly used as a rear wheel axle. If necessary, the threaded shaft must be shortened on both sides.
The complete rear axle set is also equipped with the following parts:
- 2 pieces of M12 x 1 nuts (SW19 / 10 mm)
- 1 piece of spacer washer (Ø 24 x 2.8 mm)
- 2 pieces of bearing cone (D20 x d14 mm / SW17)
- 2 pieces of bearing shells (Ø outside: 29.3 / Ø inside: 26 mm / Ø bore: 15.5 mm / length: 9.2 mm)
- 1 piece M12 x 1 nuts (SW17 / 5 mm)
- 2 pieces dust ring (Ø outer: 29.15 mm / Ø inner: 20.5 mm / thickness: 0.4 mm)
To ensure that you can enjoy your new axle for a long time, we recommend that you order the higher-quality swiing cones in the accessories section at the same time.
You can find more axle parts in the accessories section.
Details
| Total length | 218 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread length | 78 mm |
| Ø shaft | 12 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Shank length | 71 mm |
Suitable for the following models
| Puch | |
| Sachs |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut Inox
Height: 10 mm · Area of application: Standard · Material: Chrome steel (known as Nirosta®) · Surface: blank · Drive: External hexagon · Nut type: Hexagon nut 1D · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: A2-70
EUR 4.55
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25.50
EUR 2’550.00/l
66HEROES cap nut M12x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Surface: polished · Nut type: Cap nut · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 17 mm · Thread depth: 23.4 mm · Height: 26.2 mm
EUR 13.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.20
Magura cable clamp Ø 8 x 15 mm
Total length: 15 mm · Manufacturer: Magura · Area of application: Standard · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Screw head: Hexagon · Thread length: 7 mm · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Ø outside: 8 mm
EUR 2.90
Nut M12x1 x 10 SW19 Wheel nut Inox
Height: 10 mm · Area of application: Standard · Material: Chrome steel (known as Nirosta®) · Surface: blank · Drive: External hexagon · Nut type: Hexagon nut 1D · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: A2-70
EUR 4.55
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 0.5D · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Height: 5.8 mm · Width across flats SW: 19 mm · Strength class: 8 · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.10
FAG 16101 A 2RS wheel bearing 12/30/8
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 8 mm · Manufacturer: FAG · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Stock number: 16101 · Bearing type: Deep groove ball bearing · Ø inside: 12 mm · Ø outside: 30 mm · Ball bearing closed: Yes · Width: 8 mm · Area of application: Standard
EUR 17.10
Collection only possible with online purchase and appointment.
