Chrome-plated racing exhaust with attached silencer suitable for various Puch mopeds / mopeds with a straight outlet.
This tuning exhaust delivers plenty of power and is also visually stunning.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery.
These can be replaced. This changes the exhaust back pressure and therefore the performance of the silencer.
This gives you an exhaust for the lower, middle and upper speed range all in one.
You can find more racing pipes in the accessories section.
Branded product from the Portuguese manufacturer TECNO.
| Total length | 900 mm |
| Manufacturer | TECNO |
| Material | Steel, Aluminum |
| Surface | chrome-plated |
| Color | Chrome |
| Ø Silencer | 60 mm |
| Ø Internal connection | 24 mm |
| Ø Flame tube outside | 28 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Puch |
Ratings
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Ø inside: 27.4 mm · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.80
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø outside: 88 mm · Ø Silencer: 50 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Total length: 900 mm · Flame tube attachment: Stud bolts & nuts · Mounting type: Tab
EUR 338.00
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Total length: 160 mm · Width: 150 mm · Height: 88 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
EUR 177.90
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Inventory-managed: No · Manufacturer: Road Master · Tire width: 2.25 " · Color: black · Width: 2 1/4 " · Wheel size: 17 " · Old designation: 21 x 2.25 " · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4 P.R. · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 38.60
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Total length: 32 mm · Manufacturer: swiing® revival parts · Number of components: 3 pcs · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF10x1 (fine pitch thread) · Drive: Outer edge · Ø External head: 14 mm · Width across flats: 13 mm · Width across flats: 17 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread length: 13 mm · Area of application: Standard
EUR 15.30
Hot
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 92.5 mm · Number of springs: 3 pcs · Thickness: 19 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 225.30
Not in stock
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 94.80
Hot
swiing® revival 12 mm carburetor "Original" | Puch
Nominal diameter: 12 mm · Total length: 65 mm · Width: 50 mm · Height: 108 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: gray · Carburetor type: SRE · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Standard · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 82.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
