Stylish racing exhaust with an attached muffler, compatible with various Puch mopeds.
The raw steel exhaust is sealed with heat-resistant clear coat. This gives your racing moped an even more radical look. In addition, the aftermarket muffler delivers the performance its appearance promises.
The rear end of the resonator is fitted with a screw. The package includes two additional screws with different hole diameters. By swapping out the screws, you can adjust the exhaust backpressure and thus the performance characteristics of the muffler. This gives you one exhaust system that covers the low, mid, and high RPM ranges all in one!
Flame tube Ø: 28 mm
; Inner flame tube Ø: 25 mm
; Hole spacing: 43 mm
; Mounting hole: 6.2 mm
; Total length: 900 mm
You can find alternative racing mufflers and the necessary mounting hardware in the accessories section.
A brand-name product from the Portuguese manufacturer TECNO.
| Manufacturer | TECNO |
| Material | Steel |
| Surface | varnished |
| Color | gray |
| Total length | 900 mm |
| Ø Silencer | 60 mm |
| Ø outside | 90 mm |
| Mounting type | Welded lug |
| Number of fixing points | 2 pcs |
| Ø Flame tube outside | 28 mm |
| Ø Internal connection | 25 mm |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Stud bolts & nuts |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Normio M6 Nut, Heavy-Duty Galvanized
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 3D · Height: 18 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm
EUR 2.25
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Ø inside: 27.4 mm · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Place of use: Exhaust · Ø screw holder: 6.6 mm
EUR 8.80
Hot
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Ø outside: 88 mm · Manufacturer: HOMOET · Material: Steel · Color: gray · Surface: raw · Surface: varnished · Number of fixing points: 2 pcs · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Total length: 900 mm · Mounting type: Tab · Flame tube attachment: Stud bolts & nuts
EUR 344.00
Not in stock
Explore categories from Exhaust system
Moped fans also bought
Hot
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Ø outside: 61 mm · Manufacturer: GPO · Material: Metal · Camouflaged: No · Material: Rubber · Color: Chrome · Color: black · Area of application: Tuning · Filter type: Grille · Total length: 113 mm · Length rubber part: 63.5 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 49 mm · Ø Internal connection: 20 mm
EUR 15.30
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Cord thickness: 1.4 mm · Surface: raw · Color: black · Number of components: 1 pcs · Ø outside: 20 mm · Area of application: Standard · Place of use: Carburetor · Ø inside: 17.2 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.45
Normio M6 Nut, Heavy-Duty Galvanized
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 3D · Height: 18 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm
EUR 2.25
swiing® revival nozzle set M4 (50 - 60) Bing 18, Bing 85
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 11 pcs · Component group Carburetor: Spraying · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M4x0.7 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 26.00
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Ø inside: 27.4 mm · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Place of use: Exhaust · Ø screw holder: 6.6 mm
EUR 8.80
Working late? Evening hours on Thursday until 20:00
