This gas-nitrided washer is used for the brake anchor plate on your Sachs moped / moped.
The gas-nitrided washer has a small turned shoulder on the inside diameter to enclose the snap ring.
This 7 mm thick shim ring is used for newer rear wheel hubs in which the round part of the brake anchor plate consists of a rolled sheet metal and not a thick metal plate.
In addition, the spider of these wheel hubs was bolted on as standard and not firmly welded as on the older versions.
Ø inner: 10.7 mm
Ø outer: 19 mm
Thickness: 7 mm
Further accessories for your wheel hub, such as the 3.5 mm thick side bearing ring, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: F1147
| Manufacturer | swiing® revival parts |
| Surface | gas nitrided |
| Ø outside | 19 mm |
| Ø inside | 10.7 mm |
| Thickness | 7 mm |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Ø inside: 25 mm · Ø outside: 36 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Stock number: K042 · Width: 6.8 mm · Area of application: Standard
EUR 9.40
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Total length: 175 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Thread length: 34 mm · Thread length: 45 mm
EUR 28.40
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 1D · Drive: External hexagon · Nominal diameter (thread): 10.5 mm · Height: 10 mm · Thread type: MF10.5x1 (fine pitch thread) · Width across flats: 17 mm · Area of application: Standard
EUR 8.20
swiing® revival ball bearing 25.5/6.3 coaster brake driver
Bearing type: Ball ring · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Ø outside: 25.5 mm · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
EUR 8.20
Not in stock
Explore categories from Hub & axle
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Ø inside: 25 mm · Ø outside: 36 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Stock number: K042 · Width: 6.8 mm · Area of application: Standard
EUR 9.40
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 1D · Drive: External hexagon · Nominal diameter (thread): 10.5 mm · Height: 10 mm · Thread type: MF10.5x1 (fine pitch thread) · Width across flats: 17 mm · Area of application: Standard
EUR 8.20
swiing® revival ball bearing 25.5/6.3 coaster brake driver
Bearing type: Ball ring · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Ø outside: 25.5 mm · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
EUR 8.20
Not in stock
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Material: Chrome steel (colloquially known as stainless steel) · Manufacturer: swiing® revival parts · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm
EUR 35.50
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Thread type: MF10.5x1 (fine pitch thread) · Surface: galvanized (blue) · Total length: 175 mm · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread length: 34 mm · Thread length: 45 mm
EUR 35.50
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
