profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
swiing revival parts transparent

For: Pony / Cilo (Beta 521 & 512)

35673

swiing® revival front wheel axle set | Pony GTX 521

EUR 41.40

Incl. 21% VAT.

Description

Complete wheel assembly for the front wheel of your Pony GTX 521 moped.

The set includes all necessary washers, nuts, cones, and ball bearings.
The front wheel axle is made of heavy-duty special steel and can withstand the highest loads.

The cone and lock nut on the speedometer drive side are already pre-assembled. This ensures the correct spacing is maintained, eliminating the need for time-consuming adjustment.

The colored markings show you where each part goes: 

  • green mark: brake anchor plate
  • yellow mark: Replacement washer for the speedometer drive (the washer is not needed if a drive is installed)
  • red mark: wheel hub
  • blue mark: fork legs

You’ll find all the individual parts, along with matching bearing cups and a speedometer drive, in the accessories section.

A nostalgic product from the premium brand swiing® that meets the highest standards.

Manufacturerswiing® revival parts
MaterialSteel, Chrome steel (colloquially known as stainless steel)
Surfacegalvanized (blue)
Ø shaft10.25 mm
Thread length55 mm, 65 mm
Thread typeMF11x1 (fine pitch thread)
Shank length25 mm
Ball bearing closedNo
Ø ball [inch] / [mm]1/4" (6.35 mm)
Total length150 mm
Pony / Cilo (Beta 521 & 512)

Pony GTX 521 (frame)

Accessories & related products

Inox
swiing® revival speedometer disk (instead of speedometer drive) Inox
undefined

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

10349

swiing® revival speedometer disk (instead of speedometer drive) Inox

Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Ø outside: 47 mm · Ø mounting hole: 12 mm · Ø axle: 12 mm · Total height: 12 mm

EUR 7.00

Nut M11x1 x 10 SW19 Wheel nut galvanized

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo

10423

Nut M11x1 x 10 SW19 Wheel nut galvanized

Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Nominal diameter (thread): 11 mm · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: 8 · Height: 10 mm · Area of application: Standard

EUR 2.95

Wheel bearing shell Ø 32 mm

Universal

16437

Wheel bearing shell Ø 32 mm

Material: Steel · Ø inside: 28 mm · Ø bore: 15 mm · Ø outside: 32 mm · Ø Bundle: 37 mm · Height: 14.25 mm

EUR 8.20

swiing® revival 1/4" balls Ø 6.35 mm (22 pcs.)
undefined

For: Universal · Piaggio · Zündapp Belmondo

17286

swiing® revival 1/4" balls Ø 6.35 mm (22 pcs.)

Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Number of components: 22 pcs · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Area of application: Standard

EUR 5.80

Washer M11 11.2/20/2 galvanized

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Alpa Chopper / Turbo · Cilo

17395

Washer M11 11.2/20/2 galvanized

Material: Steel · Surface: galvanized (blue) · Ø inside: 11.2 mm · Nominal diameter inside: 11 mm · Ø outside: 20 mm · Thickness: 2 mm · Nominal diameter (thread): 11 mm · Thread size: M11

EUR 1.90

Wheel bearing shell Ø 32 mm (with speedometer drive slot)

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Hercules

19174

Wheel bearing shell Ø 32 mm (with speedometer drive slot)

Material: Steel · Ø inside: 14 mm · Ø outside: 32 mm · Ø Bundle: 37 mm · Height: 14 mm

EUR 11.80

Wheel bearing dust ring Ø 28 / 20 mm (with felt)

For: Universal · Sachs · Piaggio

20880

Wheel bearing dust ring Ø 28 / 20 mm (with felt)

Ø inside: 19.75 mm · Ø outside: 28.25 mm · Height: 3.6 mm · Piaggio OEM number: 124829

EUR 5.80

Nut M11x1 wheel nut | Pony GTX Beta 521 (P8392 / P8355)
undefined

For: Pony / Cilo (Beta 521 & 512)

24441

Nut M11x1 wheel nut | Pony GTX Beta 521 (P8392 / P8355)

Manufacturer: Pony · Nut type: Hexagon nut · Nominal diameter (thread): 11 mm · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Width across flats: 24 mm · Height: 6 mm · Pony OEM number: P8355 · Pony OEM number: P8392

EUR 4.25

Bearing cone M11x1 mm

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo

24619

Bearing cone M11x1 mm

Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø outside: 19 mm · Thread type: MF11x1 (fine pitch thread) · Width across flats: 15 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Height: 12 mm

EUR 9.40

swiing® revival wheel axle M11x1 x 145 galvanized
undefined

Universal

28906

swiing® revival wheel axle M11x1 x 145 galvanized

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11 mm · Shank length: 26 mm · Thread type: MF11x1 (fine pitch thread) · Thread length: 56.5 mm · Thread length: 66.5 mm · Total length: 145 mm

EUR 17.50

swiing® revival spacer sleeve front wheel axle 12.2x16x11 | Pony Cross 521, GTX 521 (P8361)
undefined

For: Pony / Cilo (Beta 521 & 512)

35066

swiing® revival spacer sleeve front wheel axle 12.2x16x11 | Pony Cross 521, GTX 521 (P8361)

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.2 mm · Nominal diameter inside: 12 mm · Ø outside: 16 mm · Total length: 11 mm · Pony OEM number: P8361

EUR 7.00

swiing® revival nut M11x1 x 6 SW17 wheel nut galvanized
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio

35667

swiing® revival nut M11x1 x 6 SW17 wheel nut galvanized

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 11 mm · Height: 6 mm · Width across flats: 17 mm

EUR 4.15

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35856

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 11.25 mm · Ball bearing closed: Yes

EUR 35.00

swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35857

swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm

EUR 47.30

swiing® ingenious wheel axle with bearing conversion kit front wheel cast rim 17" | Pony GTX 521
undefined
angle-right

For: Pony / Cilo (Beta 521 & 512)

35858

swiing® ingenious wheel axle with bearing conversion kit front wheel cast rim 17" | Pony GTX 521

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm · Ball bearing closed: Yes

EUR 71.10

swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35862

swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm

EUR 47.30

swiing® ingenious wheel axle with bearing conversion kit front wheel 16" | Pony Cross 521
undefined
angle-right

For: Pony / Cilo (Beta 521 & 512)

35863

swiing® ingenious wheel axle with bearing conversion kit front wheel 16" | Pony Cross 521

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm · Ball bearing closed: Yes

EUR 71.10

Explore categories from Hub & axle

S-20-50-030-10_Achse
Axis
S-20-50-030-15_Lagerung
Storage
S-20-50-030-20_Distanzhuelsen
Spacer sleeves
S-20-50-030-30_Freilauf
Freewheel
S-20-50-030-40_Muttern
Nuts
S-20-50-030-50_Nabenkoerper
Hub shell
S-20-50-030-60_Radspanner
Wheel tensioner
S-20-50-030-70_Schrauben-Sicherung
Screws & fuse

Moped fans also bought

Handlebar fork plate 30 cm curved with chrome strut
undefined

Universal

10298

Handlebar fork plate 30 cm curved with chrome strut

Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Width: 680 mm · Ø outside: 22 mm · Height: 270 mm · Fork plate holder length: 90 mm · Mounting type: Fork plate · Length handlebar ends: 155 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 280 mm · Clamping diameter: 22 mm

EUR 43.80

Hot Hot
Motorex Automatic Motor Oil (ATF) 450 ml
undefined

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Automatic machine · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

EUR 12.90

EUR 28.67/l

Continental 2.00 - 2.50 x 17" tube
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Zündapp

10757

Continental 2.00 - 2.50 x 17" tube

Manufacturer: Continental · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR6 car valve

EUR 17.70

Wheel bearing shell Ø 32 mm

Universal

16437

Wheel bearing shell Ø 32 mm

Material: Steel · Ø inside: 28 mm · Ø bore: 15 mm · Ø outside: 32 mm · Ø Bundle: 37 mm · Height: 14.25 mm

EUR 8.20

Exhaust gasket exhaust | Beta 521 & 512 (A8099)
undefined

For: Pony / Cilo (Beta 521 & 512)

21331

Exhaust gasket exhaust | Beta 521 & 512 (A8099)

Manufacturer: Pony · Material: Sealing carton · Material: Sheet metal (steel) · Place of use: Exhaust · Ø inside: 21.8 mm · Reinforced: Yes · Thickness: 1.7 mm · Ø screw holder: 6 mm · Area of application: Standard

EUR 5.45

swiing® revival front wheel axle set | Pony Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35668

swiing® revival front wheel axle set | Pony Cross 521

Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.25 mm · Total length: 154 mm · Thread length: 63 mm · Shank length: 27 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)

EUR 41.40

swiing® revival rear wheel axle set | Pony GTX 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35726

swiing® revival rear wheel axle set | Pony GTX 521

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Ø shaft: 11.95 mm · Total length: 175 mm · Thread length: 21 mm · Shank length: 133 mm · Ball bearing closed: Yes

EUR 50.90

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35856

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 11.25 mm · Ball bearing closed: Yes

EUR 35.00

swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35857

swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm

EUR 47.30

swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35862

swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm

EUR 47.30