Choke lever for attachment to the throttle twist grip on your moped, moped or small motorcycle.
The decompression grip with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Place of use | right |
| Color | white |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.35
Magura deco / clutch lever black
Ø inside: 22 mm · Manufacturer: Magura · Material: Plastic · Material: Steel · Surface: burnished · Housing material: Steel · Color: black · Thread type: M5x0.8 (standard thread) · Material lever: Plastic · Number of fixing points: 2 pcs · Mounting type: Screws · Total length: 94 mm
EUR 59.00
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Nipple shape: Pears · Ø Stranded wire: 1.5 mm · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Cable length: 1800 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Pony OEM number: P0919
EUR 2.85
Clamps, nipples & set screws set 73 pcs.
Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Surface: raw · Number of components: 73 pcs · Screw head: Hexagon · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Storage method: Plastic box · Dimension storage box: 18.5 x 11.0 x 1.8 cm
EUR 70.80
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm · Area of application: Standard
EUR 2.95
Front reinforcement / mudguard arch chrome (cheap)
Material: Steel · Surface: chrome-plated · Outer width: 143 mm · Color: Chrome · Distance mudguard - center hole: 207 mm · Distance mudguard - center hole: 242 mm · Ø outside: 16 mm · Wide intake: 128 mm · Mounting type: Nuts & bolts · Total length: 270 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.2 mm · Wheel size [inch]: 17 " · Hole spacing: 35 mm
EUR 12.90
Magura set screw M6x34 mm lock nut SW8
Slotted: No · Manufacturer: Magura · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Total length: 34 mm · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Thread length: 24 mm
EUR 2.95
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.35
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Tuning · Decompressor: Yes
EUR 10.50
GPO 41 mm cylinder kit fan-cooled 12 mm KoBo | Puch X30 Velux, N-2AH
Manufacturer: GPO · Manufacturer: Meteor Racing · Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 41 mm · Ø cylinder neck: 43.2 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.6 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 129.90
Not in stock
Collection only possible with online purchase and appointment.
