Choke lever for attachment to the left brake lever on your moped, moped or small motorcycle.
The decompression lever with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Color | white |
| Place of use | left |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Ratings
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Total length: 6 mm · Ø outside: 5 mm · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.40
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Color: black · Surface: burnished · Thread type: M5x0.8 (standard thread) · Housing material: Steel · Material lever: Plastic · Ø inside: 22 mm · Number of fixing points: 2 pcs · Total length: 94 mm · Mounting type: Screws
EUR 59.50
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
EUR 2.85
swiing® revival decorative lever slotted mount left black (Magura)
Manufacturer: swiing® revival parts · Material: Plastic · Material: Sheet metal (steel) · Color: black · Surface: galvanized (blue) · Surface: raw · Place of use: left · Height: 19.6 mm · Total length: 50 mm · Thickness: 1.2 mm
EUR 29.70
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Total length: 6 mm · Ø outside: 5 mm · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.40
Speedometer 60 km/h Ø 48 mm black / chrome
Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: red · Color: white · Maximum speed: 60 Km/h · Lighting: Light slit · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Ø outside: 50.4 mm · Depth: 50 mm · Ø Receptacle: 48 mm · Total height: 70 mm · Thread type: MF10x1 (fine pitch thread)
EUR 71.40
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Width: 27 mm · Performance: 100 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 41.70
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
EUR 2.85
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 170 mm · Total length: 250 mm · Ø inside: 86 mm · Thickness: 0.4 mm · Number of components: 1 pcs · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 7.05
Collection only possible with online purchase and appointment.
