Set of clamping shells for mounting the handlebars on the fork plate of original and reproduction forks of various Puch mopeds / mopeds.
External dimensions (lxwxh): 47 x 17 x 26 mm
Hole spacing: 30 mm
Ø bore: 7.3 mm
Material: aluminium, transparent anodized
Matching mounting screws, fork clamps and other mounting brackets can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Width | 17 mm |
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Clamping diameter | 22 mm |
| Total length | 47 mm |
| Height | 26 mm |
| Ø mounting hole | 7.3 mm |
| Hole spacing | 30 mm |
| Number of fixing points | 2 pcs |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
Screw M7x40 cylinder head hexagon socket, galvanized (clamping bridge)
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats: 6 mm · Thread length: 40 mm · Shank: No · Strength class: 8.8 · Thread type: M7x1 (standard thread)
EUR 2.85
66HEROES Clamping bridges aluminum black | Puch
Manufacturer: 66HEROES · Hole spacing: 30 mm · Material: Aluminum · Surface: anodized · Clamping diameter: 22 mm · Number of fixing points: 2 pcs · Total length: 49 mm · Width: 22 mm · Height: 26 mm · Color: black-matt · Ø mounting hole: 7.3 mm
EUR 34.20
swiing® revival clamping bridges aluminum green | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: green · Total length: 47 mm · Width: 17 mm · Height: 26 mm · Clamping diameter: 22 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Hole spacing: 30 mm
EUR 28.30
swiing® revival clamping bridges aluminum blue | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Color: blue · Total length: 47 mm · Width: 17 mm · Height: 26 mm · Clamping diameter: 22 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.3 mm · Hole spacing: 30 mm
EUR 28.30
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Carburetor complete · Total length: 66 mm · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 76.90
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 1600 mm
EUR 2.85
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.70
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Thread type: M7x1 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 10.5 mm · Thread length: 34.6 mm · Shank: No · Width across flats: 5 mm · Total length: 41.6 mm · Strength class: 8.8
EUR 3.45
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 920 mm · Ø outside: 58 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange · Mounting type: Stud bolts & nuts · Mounting type: Welded lug
EUR 76.90
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Ø cylinder: 44 mm · Width: 125 mm · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No
EUR 50.80
Transval speedometer drive 17" with grease nipple
Place of use: left · Place of use: right · Manufacturer: Transval · Material: Aluminum · Color: gray · 4-edge speedometer cable: 1.8 mm · Wheel size: 17 " · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 60 mm · Ø mounting hole: 11 mm · Ø outside: 41 mm · Total height: 52 mm
EUR 35.40
Collection only possible with online purchase and appointment.
