Special stud bolt set (centering sleeves) for Sachs 502, 50/2, 50/3, 50/4, 503, and 504 mopeds and small motorcycles.
The shaft in the center ensures that the cylinder is optimally guided and centered.
Thanks to the small wrench size, the nut can be installed with ease even in hard-to-reach areas at the base of the cylinder.
The increased tensile strength compensates for the difference in thread diameter.
Centering
bolt Length: 27 mm
Shank diameter: 6.1 mm
Thread: M6 / M5
Thread length: 14 / 10 mm
Stud strength class: 12.9
Nuts
: Thread: M5
; Height: 5 mm
; Wrench size: 8 mm; Hex
; Strength class: 10
; Material: Steel, galvanized
Washers
Inner diameter: 5.2 mm
Outer diameter: 12 mm
Height: 1.4 mm
Material: Steel, galvanized
Note: Depending on the cylinder’s manufacturing tolerances, it may be necessary to remove one washer so that the nut can be tightened properly.
A sophisticated product meeting the highest standards of the swiing® quality brand.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Diameter | 6 mm |
| Surface | burnished, galvanized (blue) |
| Total length | 27.3 mm |
| Thread length | 14 mm, 9.5 mm |
| Drive | External hexagon |
| Width across flats | 8 mm |
| Nominal diameter (thread) | 6 mm, 5 mm |
| Thread type | M6x1 (standard thread), M5x0.8 (standard thread) |
| Strength class | 12.9, 10 |
| Universal | |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL |
Accessories & related products
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Thread length: 12 mm · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Diameter: 5.95 mm · Strength class: 10.9
EUR 2.15
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.00
EUR 2’600.00/l
swiing® revival stud bolt M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 38 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
EUR 2.35
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2.85
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift
EUR 12.90
EUR 28.67/l
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Area of application: Standard · Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 31.40
Hot
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Mounting type: Flange · Hole spacing inlet: 31 mm · Ø fuel hose connection: 6 mm · Total length: 132 mm · Mixed oil connection: No · Width: 87 mm · Vacuum connection: No · Height: 85 mm · Choke control: without choke · Camouflaged: No · Nozzle size: 75 · Area of application: Standard · Area of application: Tuning
EUR 150.60
Hot
swiing® ingenious 41 mm cylinder kit Racing fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: No · Area of application: Racing
EUR 260.90
Not in stock
Working late? Evening hours on Thursday until 20:00
