Set 15 mm tuning intake manifold suitable for your Puch Maxi S / N moped / moped with 1-speed E50 engine.
From the factory, the original counterpart with 14 mm diameter and round intake window was installed on Austrian Puch mopeds.
The tuning intake manifold is therefore additionally provided with an embedded «14» for camouflage. When installed, the intake manifold is therefore visually indistinguishable from the original.
The cylinder-side shape corresponds to the intake window shape used by various racing engines, such as those used by swiing® or Airsal, among others.
| Ø inside | 15 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Hole spacing inlet | 38 mm |
| Mounting type | Nuts |
| Height flange center hole | 40 mm |
| Ø External connection | 20 mm |
| Total height | 52 mm |
| Number of fixing points | 2 pcs |
| Camouflaged | Yes |
| Puch | E50 |
Ratings
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Total length: 66 mm · Width: 50 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 94.80
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 46 mm · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Height flange center hole: 43 mm · Ø External connection: 20 mm · Total height: 53 mm · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.40
swiing® revival 14 mm intake manifold round inlet (AT version) | Puch E50
Ø inside: 14 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Original · Total length: 45.5 mm · Number of fixing points: 2 pcs · Total height: 52.5 mm · Height flange center hole: 42.5 mm · Ø External connection: 20 mm · Mounting type: Flange · Hole spacing inlet: 38.5 - 38 mm
EUR 41.40
EUR 29.50
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Nominal diameter: 15 mm · Thickness: 4 mm · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Place of use: Admission · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Ø screw holder: 6.2 mm
EUR 8.90
Explore categories from Carburetor & intake system
Moped fans also bought
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: Airsal · Material: Aluminum · Camouflaged: Yes · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Surface: sandblasted · Ø piston pin (B): 12 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Number of fixing points: 4 pcs · Inlet window: 23.5 / 20 x 15 · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 118.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm · Ø outside: 5 mm
EUR 2.35
Side stand chrome | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Total length: 345 mm · Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Color: Chrome · Color: black · Adjustable: Yes · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs
EUR 23.10
MBR clutch basket Racing 21 teeth angled | Puch E50
Manufacturer: MBR · Material: Steel · Toothing type: helical toothed · Color: silver · Ø Receptacle: 31 mm · Ø inside: 15 mm · Ø inside: 17 mm · Number of teeth: 21 pcs · Recording type: Interlocking · Ø outside: 99.5 mm · Height: 49.2 mm · Area of application: Tuning
EUR 213.50
PROMA Exhaust Grand Prix | Puch
Total length: 1000 mm · Ø outside: 73 mm · Manufacturer: PROMA · Material: Aluminum · Material: Steel · Color: graphite colors · Color: silver · Surface: varnished · Mounting type: Welded lug · Ø Internal connection: 22 mm · Ø Silencer: 60 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 25 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 162.40
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
