Rubber bumper for the 1st generation of the original fork on your Piaggio Ciao P moped / moped.
This protective rubber with 8 mm pin was only installed on very early models.
However, the rubber stud is also suitable for later forks where the drill hole has become larger due to corrosion or the rubber stud with 7 mm stud does not stay perfectly in position.
Price per piece. Two pieces are required to overhaul the fork.
You can find other wear parts for your fork in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 103699
Alternative to the original Piaggio spare part number: 176373
Details
| Width | 16 mm |
| Manufacturer | Made in Italy |
| Material | Rubber |
| Color | black |
| Total length | 22 mm |
| Ø mounting hole | 8 mm |
| Piaggio OEM number | 103699 |
| Alternative version of the Piaggio OEM number | 176373 |
Suitable for the following models
| Piaggio | Ciao - P |
Accessories & related products
swiing® revival fork spring Ø 24 mm reinforced (pair) Inox | Piaggio Ciao P, SC
Total length: 100 mm · Ø wire: 4.25 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Color: Chrome · Ø inside: 16.25 mm · Ø outside: 24.75 mm · Piaggio OEM number: 113124
EUR 33.00
swiing® ingenious axle swing arm set | Piaggio Ciao
Material: Brass · Material: Chrome steel (known as Nirosta®) · Manufacturer: swiing® ingenious parts · Total length: 50 mm · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Color: gold
EUR 35.40
Not so nice 
Fork repair kit (galvanized springs) | Piaggio Ciao
Material: Plastic · Material: Rubber · Material: Spring steel · Material: Steel · Surface: galvanized (blue) · Surface: powder-coated · Total length: 99 mm · Ø wire: 3.8 mm · Ø inside: 20 mm · Ø outside: 27.4 mm · Color: black · Color: silver
EUR 47.20
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.70
CIF wheel axle set M11x1 x 165 mm front wheel galvanized | Piaggio Ciao, SI, Bravo
Height: 2 mm · Height: 4 mm · Height: 10 mm · Total length: 165 mm · Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Surface: galvanized (yellow) · Thread type: MF11x1 (fine pitch thread) · Thread length: 73 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Shank length: 18 mm · Ø shaft: 10.3 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
EUR 17.60
GPO control bearing set | Piaggio Ciao
Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Bearing type: Bearing ring · Thread type: FG25.4 (1" 24G) · Ø mounting frame: 30.05 mm · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
EUR 22.40
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm
EUR 23.60
Lock washer control head / end nut original | Piaggio Ciao
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (yellow) · Area of application: Standard · Number of lobes: 3 pcs · Ø inside: 25.5 mm · Thickness: 1.5 mm · Ø outside: 32.8 mm · Color: silver · Piaggio OEM number: 189305
EUR 3.40
Not in stock
swiing® ingenious axle swing arm set | Piaggio Ciao
Material: Brass · Material: Chrome steel (known as Nirosta®) · Manufacturer: swiing® ingenious parts · Total length: 50 mm · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Color: gold
EUR 35.40
Collection only possible with online purchase and appointment.
