High-quality center kickstand for Piaggio Ciao mopeds / mopeds with 14 mm bolts.
This center kickstand was fitted as standard on the newer PX and C24 models.
The center rod is supplied complete with spring, bolt (Ø14x100 mm) and circlips (fuel rings).
Note: Older spoke wheel models had a 10 mm bolt. However, the hole in the P and SC models was often drilled out so that a spokes with a 14 mm axle can be fitted. Check the dimensions of the bolt before purchasing.
You can find more parts for your Piaggio Ciao as well as the main stem with 10 mm bolt in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 25523001
Details
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | varnished |
| Stand base - center mount (A) | 232 mm |
| Color | black |
| Total width of stand base (B) | 200 mm |
| Wide receptacle (C) | 78 mm |
| Ø Receptacle (D) | 14 mm |
| Wide upright foot (F) | 20 mm |
| Total height | 250 mm |
Suitable for the following models
| Piaggio | Ciao - PX, C24 |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Surface: varnished · Color: black · Ø Internal connection: 22 mm · Ø Silencer: 70 mm · Number of fixing points: 1 pcs · Ø outside: 14 mm · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Flame tube attachment: Plug connection clamped · Mounting type: Welded lug · Total length: 690 mm
EUR 87.20
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Camouflaged: No · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Ø piston pin (B): 10 mm · Outlet type: clamped · Decompressor: Yes · Area of application: Tuning
EUR 168.70
Main stand 10 mm axle without bolt | Piaggio Ciao P, SC
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 230 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 77 mm · Ø Receptacle (D): 10 mm · Wide upright foot (F): 20 mm · Total height: 250 mm · Piaggio OEM number: 104626
EUR 34.80
Main stand 14 mm axle | Piaggio Ciao PX, C24
Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 230 mm · Total width of stand base (B): 210 mm · Wide receptacle (C): 80 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 15 mm · Total height: 245 mm · Piaggio OEM number: 25523001
EUR 26.70
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio Ciao PX, C24
Width: 60 mm · Height: 96 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Total length: 46 mm · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SHA (Piaggio) · Nominal diameter: 13 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 6 mm
EUR 77.90
Not in stock
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 11.50
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Lens material: Plastic · Color: black · Tension: 6 V · Tension: 12 V · Ø External connection: 6.3 mm · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Depth: 147 mm · Switch included: Yes · Battery operated: No · Mounting type: Screws · Width: 125 mm · Height: 90 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
EUR 44.10
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Test mark: none · Bulb holder: BA9s · Material: Plastic · Color: black · Color: red · Number of fixing points: 2 pcs · Depth: 43 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts · Width: 130 mm · Height: 58 mm
EUR 22.00
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Bearing type: Bearing ring · Color: silver · Thread type: FG25.4 (1" 24G) · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø mounting frame: 30.05 mm · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Height: 10.5 mm · Height: 17 mm
EUR 22.00
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 23.20
Collection only possible with online purchase and appointment.
