
Digital CDI with two fully programmable ignition curves, suitable for racing or off-road use with your moped or small motorcycle.
With this CDI unit, you can freely program two individual ignition curves, each within a range of 0 to 40 degrees. Depending on your needs and the track conditions, you can, for example, set the first ignition curve for tight and difficult terrain and the second ignition curve for fast straights and long turns.
Note: This CDI cannot be combined with conventional, analog PVL ignition components.
The software can only be used to program the CDI; it cannot be used to read data from it.
You can find the compatible digital ignition coil, as well as a stator, rotor, and programming software, in the accessories section.
A quality product from the German manufacturer PVL.
| Manufacturer | PVL |
| Material | Plastic |
| Area of application | Tuning, Racing |
| Color | black |
| Ø mounting hole | 6.6 mm |
| Width | 44 mm |
| Total length | 53 mm |
| Height | 26 mm |
| Number of fixing points | 1 pcs |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) |
Accessories & related products
PVL Stator "1037" Digital Ignition
Manufacturer: PVL · Material: Aluminum · Material: Copper · Material: Plastic · Area of application: Racing · Material: Steel · Area of application: Tuning · Number of cables: 2 pcs · Color: black · Cable length: 800 mm · Ø outside: 90 mm · Ø outside: 100 mm · Number of fixing points: 3 pcs · Ø bolt circle: 82 mm
EUR 117.40
PVL Ignition Coil "466101" Digital
Manufacturer: PVL · Area of application: Racing · Area of application: Tuning · Color: black · Cable length: 120 mm · Cable length: 420 mm · Height: 65 mm · Total length: 66 mm · Place of use: Ignition · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 23 mm
EUR 117.40
Not in stock
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard · Number of components: 1 pcs
EUR 2.85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.35
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke
EUR 177.90
PVL Stator "1037" Digital Ignition
Manufacturer: PVL · Material: Aluminum · Material: Copper · Material: Plastic · Area of application: Racing · Material: Steel · Area of application: Tuning · Number of cables: 2 pcs · Color: black · Cable length: 800 mm · Ø outside: 90 mm · Ø outside: 100 mm · Number of fixing points: 3 pcs · Ø bolt circle: 82 mm
EUR 117.40
PVL Ignition Coil "466101" Digital
Manufacturer: PVL · Area of application: Racing · Area of application: Tuning · Color: black · Cable length: 120 mm · Cable length: 420 mm · Height: 65 mm · Total length: 66 mm · Place of use: Ignition · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 23 mm
EUR 117.40
Not in stock
PVL Digital In-Rotor Ignition for Left- and Right-Rotating Motors
Manufacturer: PVL · Material: Aluminum · Material: Copper · Area of application: High End · Material: Plastic · Area of application: Racing · Material: Steel · Area of application: Tuning · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø mounting plate: 100 mm · Mounting type: Screws · Number of fixing points: 3 pcs
EUR 522.00






