
Drives, brakes, steers – but better.
YSS shock absorber Racing 30 cm (oil pressure)
Surface: varnished · Manufacturer: YSS · Material: Steel · Color: black · Damping type: Hydraulic (oil) · Ø outside: 52 mm · Total length: 335 mm · Ø spars: 32 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Hole spacing: 330 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 154.10
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Ø axle: 12 mm · Material: Steel · Ø External brake pads: 80 mm · Ø outside: 91 mm · Total length: 187 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm · Ø screw holder: 6.5 mm
EUR 82.90
Not in stock
IMCA Shock absorber fork "Racing" chrome | Piaggio Ciao
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Hydraulic (oil) · Adjustable: No · Total length: 270 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 170 mm
EUR 100.70
swiing® ingenious repair kit fork (selection) | Piaggio Ciao PX / C24
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (colloquially known as stainless steel) · Material: Rubber · Material: Spring steel · Surface: electropolished · Color: Chrome · Color: black · Ø outside: 28.4 mm · Ø inside: 20 mm · Ø wire: 4.25 mm · Ø wire: 4.5 mm · Total length: 110 mm
EUR 73.50
swiing® ingenious steering bearing M26x1 (for Ø 30 mm steering head tube) High End
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: gas nitrided · Color: black · Bearing type: Bearing ring · Ø mounting frame: 30.3 mm · Ø outside: 43 mm · Ø inside: 26.8 mm · Thread type: MF26x1 (fine pitch thread)
EUR 65.20
EBR fork chrome reinforced | Puch
Surface: chrome-plated · Manufacturer: EWC · Material: Steel · Color: Chrome · Thread type: MF26x1 (fine pitch thread) · Spar end distance (center-center): 140 mm · Total length: 580 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Thread length: 57 mm · Adjustable: No · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm
EUR 157.70
swiing® revival fork repair kit | Puch
Manufacturer: swiing® revival parts · Puch OEM number: 349.1.30.820.1 · Puch OEM number: 349.1.30.117.1 · Puch OEM number: 349.1.30.137.1 · Puch OEM number: 349.1.30.135.1 · Puch OEM number: 349.1.30.126.1 · Puch OEM number: 349.2.30.134.1 · Puch OEM number: 367.1.30.031.1
EUR 106.70
Brake pads make all the difference
Brake pads transfer the force from your hand to the brake.
If they are too thin or glazed, braking performance is significantly reduced.
Typical signs:
Replacing them is not rocket science, but it is important for safety.
Constant pressure point
Disc brakes brake significantly more evenly and efficiently than drum brakes.
Wet conditions and temperature hardly play a role.
Technically, this means:
Winter is ideal for retrofitting because there is time for precise adjustment.
What the damper really does
The shock absorber keeps the wheel on the ground.
Not only does it provide suspension, it also stabilises the entire chassis.
If it is worn out or incorrectly adjusted,
A functioning damper provides directional stability and a significantly more stable driving experience.
Tivedens engine 41 mm cylinder kit S3 fan-cooled | Sachs 50/2 (DE), 50/3
Surface: varnished · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 344.00
Not in stock
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Surface: varnished · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 344.00
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 379.60
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom, metal lever | Puch Maxi S / N
Manufacturer: OMG · Material: Aluminum · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Outer width: 18 mm · Mounting type: screw in (thread) · Installation direction: vertical / vertical · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 60 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 15.30
Polini diaphragm block | Minarelli horizontal
Manufacturer: Polini · Material: Carbonite · Material: Plastic · Material: Steel · Thread type: M6x1 (standard thread) · Number of flaps: 4 pcs · Width: 36.3 mm · Width: 39.7 mm · Width: 64.9 mm · Width: 75.2 mm · Membrane material: Carbonite · Thick membrane platelets: 0.35 mm · Total length: 38.9 mm · Thickness: 3.5 mm · Ø mounting hole: 6.4 mm · Hole spacing: 52.5 mm · Hole spacing: 62 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Hole pattern [mm]: 52.5 x 62
EUR 41.40
swiing® revival screw set M8x22 cylinder head cast hub chrome | Puch
Manufacturer: swiing® revival parts · Thread type: M8x1.25 (standard thread) · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of components: 5 pcs · Total length: 30 mm · Nominal diameter (thread): 8 mm · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 14.8 mm · Width across flats: 6 mm · Thread length: 22 mm · Puch OEM number: 321.1.40.205.1
EUR 27.20
Siggnature Tankbar
The legendary Tankbar at Siggnature Bikes in Saland.
Bar service, live music and food truck every first Friday of the month.
Friendly people, bikes and good conversation.
















