High-quality grip set from the Italian manufacturer ProGrip with reliable grip and special finger guidance in a cool color.
The black-grey rubber grips consist of two rubber components: A hard inner shell that prevents twisting on the handlebars, and a special Progrip compound that reduces vibrations and keeps your hands firmly on the grips. The large inner collar also ensures optimum grip for cross use.
One set consists of one grip cover each with an inner diameter of 22 or 24 mm.
For a manually shifted moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, two grip sets must therefore be ordered. The grip ends are closed, but can be opened individually if required (e.g. for mounting a side mirror).
Total length: 115 mm
To make mounting easier, we recommend heating the rubber grip slightly or spraying it with hairspray on the inside.
Quality product from the Italian manufacturer ProGrip.
Details
| Manufacturer | ProGrip |
| Material | Rubber |
| Color | black, gray |
| Ø inside | 22 mm, 24 mm |
| Total length | 115 mm |
Accessories & related products
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Number of components: 7 pcs
EUR 11.70
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Drive: Slot · Thread length: 4 mm
EUR 2.35
Luster terminal 3-pole black small (0.1 - 2.5 mm²)
Cable cross-section: 0.1 - 2.5 mm · Clamping diameter: 3.3 mm · Number of connections: 6 pcs · Color: black · Manufacturer: Made in Germany · Total length: 18.5 mm · Width: 22 mm · Height: 15.5 mm · Number of components: 1 pcs · Material: Brass · Material: Plastic · Material: Steel · Area of application: Workshop accessories
EUR 1.65
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 15 mm · Total length: 66 mm · Height: 95 mm · Carburetor type: SRE · Width: 50 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 94.60
Fork lock (1A quality) | Puch
Ø rotating part: 11.9 mm · Wide locking block: 4.2 mm · Locking block length: 15.6 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 11.9 mm · Width: 16.9 mm · Total length: 40.6 mm · Length of turned part: 26 mm · Ø Pin: 8 mm
EUR 42.50
Collection only possible with online purchase and appointment.
