Hot 
Stylish racing silencer for various Puch mopeds / mopeds with racing cylinders and straight exhaust.
This racing exhaust impresses with its solid construction and high-quality workmanship.
The curved resonance area winds around the rear mounting point and allows the silencer of the tuning exhaust to look slightly upwards at the end.
Due to the size of the resonance body, this racing muffler gives your moped a brute increase in power in the medium speed range.
You can find more exhaust systems and add-on parts in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Total length | 945 mm |
| Ø Silencer | 45 mm |
| Ø Internal connection | 22 mm |
| Mounting type | Nuts & bolts |
| Ø outside | 91 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Stud bolts & nuts |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Nut M6 high (3D) galvanized
Manufacturer: Normio · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 3D · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Height: 18 mm · Width across flats: 10 mm
EUR 2.25
66HEROES Exhaust bracket 100 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 130 mm · Thickness: 4 mm · Hole spacing: 100 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm
EUR 15.30
Not in stock
Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Thickness: 3 mm · Place of use: Exhaust · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning · Ø screw holder: 6.6 mm
EUR 8.80
Explore categories from Exhaust system
Moped fans also bought
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Drive: Slot · Thread type: M8x1.25 (standard thread) · Total length: 18 mm · Screw head: Hexagon · Thread length: 12 mm · Width across flats Screw: 13 mm · Puch OEM number: 901.1053
EUR 4.15
Simonini carbon exhaust | Puch
Material: Steel · Surface: varnished · Total length: 875 mm · Manufacturer: Simonini · Ø outside: 90 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Silencer: 60 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 260.90
Hot
swiing® ingenious "Expert" motor stand
Surface: varnished · Material thickness: 3.5 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 21.5 mm · Area of application: Motor bracket · Material: Steel · Color: red · Color: white · Width: 245 mm · Height: 340 mm · Total length: 370 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm
EUR 88.90
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Tension: 12 V · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g · Area of application: Tuning
EUR 433.00
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Ø inside: 17 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53.5 mm · Height flange center hole: 42 mm · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 53.30
Working late? Evening hours on Thursday until 20:00
