Forged Wössner high-performance piston for the 47 mm Gilardoni italkit Puch cylinder kit when operated with a housing-membrane inlet (GME).
Attention, the piston cannot be used for conventional Gilardoni italkit cylinders which are operated with cylinder diaphragm inlet (ZME).
GME forged piston developed by MBR with a 1 mm rectangular piston ring with internal locking (IS), which is very often used in the Mofacross / Mofacup scene.
Optimal material structure, flow-optimized shape and large lubrication pockets above the piston pin characterize this high-quality racing piston.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the common piston rings, their stems and locking types on the legend in the images.
The molybdenum coating in combination with oil provides technologically advanced wear protection with outstanding sliding properties.
Recommended piston size (coating corresponds to +0.01 mm to +0.02 mm):
Gilardoni italkit Cylinder A (47.00 mm): 46.94 mm piston (in exceptional cases, e.g. when using ASP®).e.g. when using ASPEN: 46.93 mm piston)
Gilardoni italkit cylinder B (47.01 mm): 46.95 mm piston
Gilardoni italkit cylinder C (47.02 mm): 46.96 mm piston
Gilardoni italkit cylinder D (47.03 mm): 46.97 mm piston
Piston ring, piston pin and piston pin retainers are included in the scope of delivery.
Matching add-on parts such as cylinder kits, needle bearings, stroke plates, carburettors, air filters etc. can be found under accessories.
| Nominal diameter | 47 mm |
| Manufacturer | Wössner, MBR |
| Surface | molybdenum-coated |
| Ø outside piston (A) | 46.94 mm |
| Compression height (C) | 21.5 mm |
| Curvature (D) | 2.63 mm |
| Total piston height (E) | 48.15 mm |
| Number of piston rings (F) | 1 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 1 mm |
| Ø piston pin (B) | 12 mm |
| Piston weight | 97 g |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
HOMOET exhaust P8 | Puch (slanted exhaust)
Ø outside: 88 mm · Color: black · Manufacturer: HOMOET · Total length: 915 mm · Material: Steel · Surface: varnished · Mounting type: Welded lug · Ø Silencer: 50 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø Internal connection: 25 mm · Flame tube attachment: Flange
EUR 342.60
swiing® ingenious intake manifold Gilardoni italkit Inox
Ø inside: 21 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Ø External connection: 24 mm · Mounting type: Screws · Hole pattern [mm]: 60 x 35 · Total length: 80 mm · Number of fixing points: 4 pcs · Total height: 55 mm · Height flange center hole: 42.5 mm · Area of application: Tuning
EUR 80.20
Not in stock
MBR piston 46.94 mm Gilardoni italkit | Puch
Manufacturer: MBR · Manufacturer: Wössner · Surface: molybdenum-coated · Nominal diameter: 47 mm · Ø outside piston (A): 46.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22 mm · Curvature (D): 2.65 mm · Total piston height (E): 48.15 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1 mm · Piston weight: 93 g
EUR 140.50
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.35
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Surface: blank · Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Total length: 19 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 2.95
Magura set screw M5x34 mm
Slotted: No · Manufacturer: Magura · Width across flats Screw: 8 mm · Surface: nickel-plated · Ø cable holder: 2.55 mm · Ø Receptacle: 7.05 mm · Material: Brass · Total length: 34 mm · Thread type: M5x0.8 (standard thread) · Width across flats nut: 8 mm · Thread length: 24 mm
EUR 2.95
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 41.6 mm · Screw head: Cylinder head · Ø External head: 10.5 mm · Thread length: 34.6 mm · Drive: Hexagon socket · Shank: No · Width across flats SW: 5 mm · Thread type: M7x1 (standard thread) · Number of components: 1 pcs · Area of application: Standard · Strength class: 8.8
EUR 3.40
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Area of application: Tuning · Displacement: 75 ccm · Nominal diameter: 47 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51 mm · Ø Inlet inside: 18.3 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Number of fixing points: 4 pcs · Outlet type: slanted · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 248.00
Collection only possible with online purchase and appointment.
