All wishlists Community wishlists
Carousel Image 1
logo_mbr

For: Puch

21499

MBR clutch springs soft KTM SX50 clutch | Puch E50

rating iconrating iconrating iconrating iconrating icon
No reviews
EUR 28.40

Incl. 21% VAT.

Description

Clutch springs suitable for the KTM SX50 clutch for Puch Maxi mopeds with E50 engine.
Specially developed for racing purposes. Designed for the highest loads.

The set consists of 3 springs and 3 washers.

The clutches engage at approx. 5000 - 7000 rpm, depending on the oil, etc.
In order to change the clutch engagement speed, the enclosed shims can be installed. This increases the clutch engagement speed by approx. 500 rpm.

The springs are made of stainless steel and can withstand temperatures of up to 240 degrees.

You can find other spring strengths in our range.

Spring designPressure spring
ManufacturerMBR
Number of components6 pcs
MaterialSpring steel
Area of applicationRacing
Colorwhite
Puch

E50

Accessories & related products

MBR spur gear 94 teeth "Racing" straight | Puch E50
undefined

For: Puch

21491

MBR spur gear 94 teeth "Racing" straight | Puch E50

Manufacturer: MBR · Material: Steel · Surface: hardened & ground · Toothing type: straight toothed · Recording type: Interlocking · Number of teeth: 94 pcs · Ø axle: 17 mm · Ø outside: 145 mm

EUR 237.20

Explore categories from Standard parts

S-30-20-010_Dicht_O-Ringe
Seals & O-rings
S-30-20-020_Eletrozubehoer
Electrical accessories
S-30-20-030_Federn
Springs
S-30-20-040_Lager
Warehouse
S-30-20-050_Schrauben_Verbindungselemente
Screws & fasteners
S-30-20-060_Silentbloecke_Gummiteile
Silent blocks & rubber parts
S-30-20-070_Simmeringe
Shaft seals

Moped fans also bought

GPO fork lock | Puch
undefined

For: Puch

10081

GPO fork lock | Puch

Ø Pin: 8 mm · Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Ø outside: 12 mm · Width: 17 mm · Length of turned part: 25.6 mm · Total length: 40.8 mm

EUR 12.50

swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Solex · Tomos

10126

swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Strength class: 10.9

EUR 2.15

swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
undefined

For: Puch

10169

swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50

Manufacturer: swiing® revival parts · Color: silver · Material: Copper · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Width across flats Screw: 13 mm · Total length: 18 mm · Puch OEM number: 901.1053

EUR 4.15

Motorex engine oil (gear oil) manual 450 ml
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos · Cilo · Hercules · Kreidler · Zündapp

10365

Motorex engine oil (gear oil) manual 450 ml

Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C

EUR 12.90

EUR 28.67/l

Hot Hot
Motorex Automatic Motor Oil (ATF) 450 ml
undefined

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

EUR 12.90

EUR 28.67/l

Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo

10371

Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube

Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 16 - 17 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve

EUR 12.50

Spring Ø 2/12 x 92 mm

Universal

12241

Spring Ø 2/12 x 92 mm

Spring design: Tension spring · Ø wire: 2 mm · Material: Spring steel · Surface: galvanized (blue) · Ø outside: 12 mm · Total length: 92 mm

EUR 5.20

MBR Clutch KTM SX50 | Puch E50
undefined

For: Puch

21498

MBR Clutch KTM SX50 | Puch E50

Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning

EUR 403.30

MBR clutch springs medium KTM SX50 clutch | Puch E50
undefined

For: Puch

21505

MBR clutch springs medium KTM SX50 clutch | Puch E50

Spring design: Pressure spring · Manufacturer: MBR · Material: Spring steel · Color: black · Number of components: 6 pcs · Area of application: Racing

EUR 27.20

MBR clutch springs hard KTM SX50 clutch | Puch E50
undefined

For: Puch

21506

MBR clutch springs hard KTM SX50 clutch | Puch E50

Spring design: Pressure spring · Manufacturer: MBR · Material: Spring steel · Color: red · Number of components: 6 pcs · Area of application: Racing

EUR 29.50