Racing air filter with solid plastic housing and red foam insert.
The air filter has a centric connection, as shown in Figure 3.
Fits all Dell'Orto PHBG carburetors. Is screwed directly onto the thread of the carburetor.
Can therefore be fitted without any problems even in tight spaces.
The housing can be easily opened to clean the filter.
Ø external air filter height: 80 mm
Height air filter height: 45 mm
Ø carburettor connection: 31 mm (with thread)
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Color | black |
| Area of application | Tuning |
| Thread type | MF32x1.25 (fine pitch thread) |
| Filter type | Foam |
| Height | 45 mm |
| Ø Internal connection | 31 mm |
| Ø outside | 80 mm |
| Camouflaged | No |
| Mounting type | Screws |
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 14.80
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Displacement: 70 ccm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Ø outlet inside: 25 mm · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 118.50
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread)
EUR 2.15
GPO 17.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 17.5 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Mounting type: Bride · Carburetor type: PHBG AS · Mounting type: Plug connection clamped · Total length: 71.5 mm · Choke control: Hand choke · Width: 63 mm · Height: 130 mm · Nozzle thread: M5x0.8 (standard thread) · Ø without reducing sleeve: 26 mm · Nozzle size: 80 · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Area of application: Tuning · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke nozzle size: 55 · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 94.80
Polini 47 mm cylinder kit | Minarelli V1
Nominal diameter: 47 mm · Manufacturer: Polini · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Displacement: 75 ccm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 18.3 mm · Number of fixing points: 4 pcs · Thread inlet: M5x0.8 (standard thread) · Area of application: Tuning · Hole spacing inlet: 38.5 mm · Ø piston pin (B): 12 mm · Decompressor: none · Outlet type: straight · Hole pattern [mm]: 46 x 46 · Hole spacing outlet: 38 mm · Thread outlet: M6x1 (standard thread)
EUR 249.00
Working late? Evening hours on Thursday until 20:00
