Oldie luggage carrier with clamp for your older Piaggio Ciao P moped / moped.
The rear luggage carrier is only suitable for the old model with rigid, angular seat post and rear light on the mudguard.
Mounting takes place at the original attachment points under the saddle and on the screws of the seat stays. The tool compartment remains accessible.
Total length: 500 mm
Width: 165 mm
Height: 100 mm
Fixing distance front: 60 mm
Fixing distance rear: 131 mm
Length of luggage carrier clamp: 220 mm
Matching luggage bags as well as an alternative luggage carrier can be found in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Mounting type | Screws, Nuts & bolts |
| Number of fixing points | 4 pcs |
| Total length | 500 mm |
| Width | 165 mm |
| Height | 100 mm |
| Ø mounting hole | 6.5 mm, 9 mm |
| Hole spacing | 60 mm, 131 mm |
| Piaggio | Ciao - P |
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Total length: 575 mm · Color: Chrome · Width: 140 mm · Height: 100 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Mounting type: Screws · Hole spacing: 85 mm · Hole spacing: 135 mm · Number of fixing points: 4 pcs · Piaggio OEM number: 114151
EUR 130.40
Not in stock
Explore categories from Luggage carrier & trailer coupling
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Width: 105 mm · Height: 5.3 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 12.90
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Color: black · Material: Steel · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Surface: varnished · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
EUR 23.60
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Width: 72 mm · Total length: 82 mm · Color: black · Height: 111 mm · Nozzle thread: M5x0.8 (standard thread) · Nominal diameter: 16 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle size: 82
EUR 82.90
swiing® revival screw set galvanized fan cover | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Number of components: 8 pcs · Material: Steel · Surface: galvanized (blue) · Screw head: Panhead · Thread type: M5x0.8 (standard thread) · Drive: Cross recess · Nominal diameter (thread): 5 mm · Area of application: Standard
EUR 5.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
