Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi N chopper as well as X30 chopper moped / moped with 14" rim.
The brake anchor plate was manufactured in a small series with the old casting tools and therefore corresponds to the original from the past.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with grooved ball bearings and an M11 axle.
The 28 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing these with a high-quality alternative such as those in the accessories section.
| Ø inside | 80 mm |
| Manufacturer | LELEU |
| Ø outside | 115 mm |
| Material | Aluminum |
| Ø axle | 11 mm |
| Axle length | 160 mm |
| Ø bolt circle | 105 mm |
| Number of spoke holes | 28 pcs |
| Ø drum | 80 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Ø spoke hole | 3.7 mm |
| Area of application | Original |
| Puch |
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Ø outside: 10 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Steel · Surface: galvanized (blue) · Total length: 41.1 - 65 mm · Thread length: 30 mm · Area of application: Special tool · Width across flats: 8 mm · Thread type: M6x1 (standard thread)
EUR 19.60
Hot 
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Manufacturer: LELEU · Ø axle: 11 mm · Material: Aluminum · Ø outside: 115 mm · Number of spoke holes: 36 pcs · Thread type: MF11x1 (fine pitch thread) · Ø drum: 80 mm · Area of application: Original · Axle length: 160 mm · Ø spoke hole: 3.7 mm
EUR 189.70
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Material: Aluminum · Area of application: Standard · Ø drum: 80 mm · Color: silver · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Total length: 185 mm · Ø axle: 12 mm · Width: 105 mm · Ø bolt circle: 105.5 mm · Number of spoke holes: 36 pcs · Ø outside: 115 mm · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Number of fixing points: 6 pcs · Ø spoke hole: 3.7 mm · Puch OEM number: 349.5.41.803.1
EUR 112.60
Explore categories from Hub & axle
Moped fans also bought
Side stand chrome | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Color: Chrome · Color: black · Adjustable: Yes · Length pivot point - floor: 220 mm · Total length: 345 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs
EUR 23.10
GPO 19" spoke set incl. nipple (2.9 x 212 mm) Inox
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: raw · Quantity: 36 pcs · Color: silver · Length from hook: 212 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Nominal diameter (thread): 3.15 mm · Nipple length: 14 mm · Ø nipple head: 8.1 mm · Ø Nipple neck: 5 mm · Hook length: 9.8 mm · Hook angle: 95 ° · Thread length: 11 mm
EUR 71.10
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Ø inside: 2.5 mm · Ø outside: 8 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Total length: 25 mm · Carburetor type: 85 · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
EUR 4.65
MMB Speedometer Drive, 19", Right-Hand, 10 mm Shaft (for VDO Speedometer Cable) NOS | Puch X30 Velux
Manufacturer: MMB Instrumente · Material: Aluminum · Place of use: right · Wheel size: 19 " · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 10 mm · Ø axle: 10 mm · Thread type: MF10x1 (fine pitch thread)
EUR 69.90
Working late? Evening hours on Thursday until 20:00
